ALTERNATORTNV IDI Service Manual 11-13Alternator3. Position the stator assembly (Figure 11-13, (1))on the front frame housing studs.4. Lubricate the shaft of the rotor assembly(Figure 11-14, (1)). Press the rotor assemblyinto the front frame housing (Figure 11-14, (2))and rear frame housing (Figure 11-14, (3)).Figure 11-145. Align the front frame housing with the rearframe housing. Reinstall the two bolts(Figure 11-15, (1)) and two nuts(Figure 11-15, (2)).Figure 11-156. Reinstall the insulation bushing(Figure 11-16, (4)) and nut (Figure 11-16, (3)).Figure 11-167. Reassemble the regulator assembly(Figure 11-16, (1)) to the holder(Figure 11-16, (2)).8. Reinstall the brush holder (Figure 11-17, (3)),springs (Figure 11-17, (4)) and brushes(Figure 11-17, (5)).9. Reattach the regulator assembly and holder tothe rear frame housing.Figure 11-1710. Reinstall the rear cover (Figure 11-17, (2)) tothe rear frame housing with three bolts(Figure 11-17, (1)).100266A2130000265A1234 120000258A345120000257A
