ALTERNATORTNV IDI Service Manual 11-11Alternator2. Remove the three bolts (Figure 11-6, (1))retaining the rear cover (Figure 11-6, (2)) to therear frame assembly.Figure 11-63. Remove the brush holder (Figure 11-6, (3)).Remove the brush springs (Figure 11-6, (4))and brushes (Figure 11-6, (5)).4. Remove the bolt retaining the regulatorassembly (Figure 11-7, (1)) to the holder(Figure 11-7, (2)).Figure 11-75. Remove the bolts retaining the holder(Figure 11-7, (2)) to the rear frame housing.Remove the holder.6. Remove the nut (Figure 11-7, (3)) retaining theinsulation bushing (Figure 11-7, (4)). Removethe insulation bushing.7. Remove the two bolts (Figure 11-8, (1)) andtwo nuts (Figure 11-8, (2)) securing the rearframe housing to the front frame housing.Figure 11-88. Using a press, remove the rotor assembly(Figure 11-9, (1)) from the front frame housing(Figure 11-9, (2)) and rear frame housing(Figure 11-10, (1)).Figure 11-9345120000257A34 120000258A0000265A12100266A213
