Manuals database logo
manualsdatabase
Your AI-powered manual search engine

ABB ACS880-17 manuals

ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: Servo Drives
Table of contents
  1. List of related manuals
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. What this chapter contains
  9. Contents of the manual
  11. Local control vs. external control
  12. External control
  13. Operating modes of the drive
  14. Speed control mode
  16. Drive configuration and programming
  17. Adaptive programming
  18. Application programming
  19. Control interfaces
  20. Programmable I/O extensions
  21. Fieldbus control
  22. Master/follower functionality
  23. External controller interface
  24. Control of a supply unit (LSU)
  25. Motor control
  26. Constant speeds/frequencies
  27. Speed controller autotune
  28. Oscillation damping
  29. Rush control
  30. Encoder support
  31. Jogging
  32. Scalar motor control
  33. Autophasing
  34. Flux braking
  35. DC magnetization
  36. Application control
  37. Motor potentiometer
  38. Mechanical brake control
  39. DC voltage control
  40. Voltage control and trip limits
  41. Brake chopper
  42. Safety and protections
  43. Motor thermal protection
  44. Thermal protection of motor cable
  45. Other programmable protection functions
  46. Automatic fault resets
  47. Diagnostics
  48. Energy saving calculators
  49. Miscellaneous
  50. User lock
  51. du/dt filter support
  52. Sine filter support
  54. Factory macro
  55. Default control connections for the Factory macro
  56. Hand/Auto macro
  57. Default control connections for the Hand/Auto macro
  58. PID control macro
  59. Default parameter settings for the PID control macro
  60. Default control connections for the PID control macro
  61. Sensor connection examples for the PID control macro
  62. Torque control macro
  63. Default control connections for the Torque control macro
  64. Sequential control macro
  65. Selection of constant speeds
  66. Default control connections for the Sequential control macro
  67. Fieldbus control macro
  69. Terms and abbreviations
  70. Summary of parameter groups
  71. Parameter listing
  72. Input references
  73. Warnings and faults
  75. Control and status words
  76. System info
  77. Standard DI, RO
  78. Standard DIO, FI, FO
  79. Standard AI
  80. Standard AO
  81. I/O extension module 1
  82. I/O extension module 2
  83. I/O extension module 3
  84. Operation mode
  85. Start/stop/direction
  86. Start/stop mode
  87. Speed reference selection
  88. Speed reference ramp
  89. Speed reference conditioning
  90. Speed control
  91. Torque reference chain
  92. Frequency reference chain
  93. Limits
  94. Fault functions
  95. Supervision
  96. Generic timer & counter
  98. Load analyzer
  99. User load curve
  100. Process PID set 1
  101. Process PID set 2
  104. Energy efficiency
  105. Monitoring/scaling settings
  106. Data storage
  107. Panel port communication
  108. Fieldbus adapter (FBA)
  109. FBA A settings
  110. FBA B settings
  111. Embedded fieldbus
  112. DDCS communication
  113. D2D and DDCS transmit data
  114. D2D and DDCS receive data
  115. Feedback selection
  116. Encoder module settings
  117. Encoder 1 configuration
  118. Encoder 2 configuration
  119. LSU control
  120. HW configuration
  121. System
  123. User motor parameters
  124. Motor data
  125. Safety
  127. Fieldbus addresses
  128. Parameter groups 1...9
  129. Parameter groups 10...99
  131. Pure events
  132. Other data loggers
  133. QR Code generation for mobile service application
  134. Warning messages
  135. Fault messages
  137. Connecting the fieldbus to the drive
  138. Setting up the embedded fieldbus interface
  139. Setting the drive control parameters
  140. Basics of the embedded fieldbus interface
  141. Control word and Status word
  142. Register addressing
  143. About the control profiles
  144. The ABB Drives profile
  145. Status Word
  146. State transition diagram
  147. References
  148. Actual values
  149. Modbus holding register addresses
  150. The Transparent profile
  151. Modbus function codes
  152. Exception codes
  153. Coils (0xxxx reference set)
  154. Discrete inputs (1xxxx reference set)
  155. Error code registers (holding registers 400090...400100)
  157. Basics of the fieldbus control interface
  160. Contents of the fieldbus Control word (ABB Drives profile)
  161. Contents of the fieldbus Status word (ABB Drives profile)
  162. The state diagram (ABB Drives profile)
  163. Setting up the drive for fieldbus control
  164. Parameter setting example: FPBA (PROFIBUS DP)
  166. Speed reference source selection I
  167. Speed reference source selection II
  168. Speed reference ramping and shaping
  169. Motor feedback configuration
  170. Load feedback and position counter configuration
  171. Speed error calculation
  172. Speed controller
  173. Torque reference source selection and modification
  174. Operating mode selection
  175. Reference selection for torque controller
  176. Torque limitation
  177. Torque controller
  178. Frequency reference selection
  179. Frequency reference modification
  180. Process PID setpoint and feedback source selection
  181. Process PID controller
  182. Master/Follower communication I (Master)
  183. Master/Follower communication II (Follower)
  184. Product and service inquiries
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: Industrial Electrical
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Contents of this chapter
  5. Related manuals
  7. Selecting the main contactor (breaker)
  8. Selecting the supply transformer
  9. Additional notes
  10. A drive with a 12-pulse diode supply unit
  11. Examining the compatibility of the motor and drive
  12. Availability of du/dt filter and common mode filter by drive type
  13. Additional requirements for non-ABB high-output and IP23 motors
  14. Additional data for calculating the rise time and the peak line-to-line voltage
  15. Selecting the power cables
  16. Alternative power cable types
  17. Not allowed power cable types
  18. Additional US requirements
  19. Selecting the control cables
  20. Routing the cables
  21. Separate control cable ducts
  22. Implementing thermal overload and short circuit protections
  23. Multidrive modules
  24. Implementing a motor temperature sensor connection
  25. Implementing a ground fault protecting function
  26. Implementing the Emergency stop function
  27. Implementing the Prevention of unexpected start-up function
  29. Implementing the Power-loss ride-through
  30. Implementing a bypass connection
  32. Applicable standards
  33. Markings
  34. EMC compliance (IEC/EN 61800-3:2004 + A2012)
  35. Category C3
  36. EU Declaration of Conformity (Machinery Directive)
  37. UL and CSA checklist
  38. Disclaimers
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: DC Drives
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: DC Drives
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: DC Drives
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: DC Drives
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: Industrial Equipment
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: Servo Drives
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: Controller
Table of contents
  1. List of related manuals
  2. Table Of Contents
  3. Table Of Contents
  4. Contents of this chapter
  5. Target audience
  6. Exclusion of liability
  7. Quick reference guide for implementing a safety system
  8. Contents this chapter
  9. Operation principle
  10. ACS880-17/37 drives, frame R11
  11. ACS880-07 drives, frames nxDXT + nxR8i
  12. ACS880-17/37 drives, frames nxR8i + nxR8i
  13. Fault reaction function
  14. Hardware settings
  15. Start-up and acceptance test
  16. Use of the safety function
  17. Maintenance
  18. Intentional misuse
  19. Safety data
  20. ACS880-07 drives with a main contactor
  21. ACS880-17/37 drives with a main contactor
  22. ACS880-07/17/37 drives with a main circuit breaker
  23. Safety block diagrams
  24. Relevant failure modes
  25. General rules, notes and definitions
  26. Ambient conditions
  27. Related standards and directives
  28. Product and service inquiries
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: Controller
Table of contents
  1. List of related manuals
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Table Of Contents
  9. What this chapter contains
  10. Licensing
  11. Contents of the manual
  13. Local control vs. external control
  14. External control
  15. Operating modes of the drive
  16. Speed control mode
  17. Contents of this chapter
  18. Drive start-up
  19. ESP application minimum configuration
  21. Backspin supervision
  22. Backspin speed observer constraints
  23. Starting the motor
  24. Kick-start
  25. Current pulse-start
  26. ESP production mode
  27. Automatic process control mode
  28. Underload and overload protection
  29. Underload ride through recovery sequence
  30. Overload recovery sequence
  31. Motor voltage control
  32. Pump impeller cleaning
  33. Pump curves
  35. Drive configuration and programming
  36. Adaptive programming
  37. Control interfaces
  38. Programmable relay outputs
  39. Fieldbus control
  40. Master/follower functionality
  41. External controller interface
  42. Control of a supply unit (LSU)
  43. Motor control
  44. Constant speeds/frequencies
  45. Speed controller autotune
  46. Oscillation damping
  47. Resonance frequency elimination
  48. Encoder support
  49. Jogging
  50. Scalar motor control
  51. Autophasing
  52. Flux braking
  53. DC magnetization
  54. Hexagonal motor flux pattern
  55. Application control
  56. Motor potentiometer
  57. Mechanical brake control
  58. DC voltage control
  59. Voltage control and trip limits
  60. Brake chopper
  61. Safety and protections
  62. Motor thermal protection
  63. Thermal protection of motor cable
  64. Automatic fault resets
  65. Other programmable protection functions
  66. Diagnostics
  67. Energy saving calculators
  68. Miscellaneous
  69. User lock
  70. Reduced run function
  71. du/dt filter support
  73. Factory macro
  74. Default control connections for the Factory macro
  75. Hand/Auto macro
  76. Default control connections for the Hand/Auto macro
  77. PID control macro
  78. Default parameter settings for the PID control macro
  79. Default control connections for the PID control macro
  80. Sensor connection examples for the PID control macro
  81. Torque control macro
  82. Default control connections for the Torque control macro
  83. Sequential control macro
  84. Selection of constant speeds
  85. Default control connections for the Sequential control macro
  86. Fieldbus control macro
  88. Terms and abbreviations
  89. Summary of parameter groups
  90. Parameter listing
  91. Input references
  92. Warnings and faults
  94. Control and status words
  95. System info
  96. ESP signals
  97. Standard DI, RO
  98. Standard DIO, FI, FO
  99. Standard AI
  100. Standard AO
  101. I/O extension module 1
  102. I/O extension module 2
  103. I/O extension module 3
  104. Operation mode
  105. Start/stop/direction
  106. Start/stop mode
  107. Speed reference selection
  108. Speed reference ramp
  109. Speed reference conditioning
  110. Speed control
  111. Torque reference chain
  112. Frequency reference chain
  113. Limits
  114. Fault functions
  115. Supervision
  116. Generic timer & counter
  118. Load analyzer
  119. User load curve
  120. Process PID set 1
  121. Process PID set 2
  124. Energy efficiency
  125. Monitoring/scaling settings
  126. Data storage
  127. Panel port communication
  128. Fieldbus adapter (FBA)
  129. FBA A settings
  130. FBA B settings
  131. Embedded fieldbus
  132. DDCS communication
  133. D2D and DDCS transmit data
  134. D2D and DDCS receive data
  135. ESP control
  136. ESP reference setup
  137. ESP automatic control
  138. Load protection
  139. Voltage control
  140. Pump cleaning
  141. Q-H pump curves
  142. Feedback selection
  143. Encoder module settings
  144. Encoder 1 configuration
  145. Encoder 2 configuration
  146. LSU control
  147. HW configuration
  148. System
  150. User motor parameters
  151. Motor data
  152. Safety
  154. Fieldbus addresses
  155. Parameter groups 1...9
  156. Parameter groups 10...99
  158. Pure events
  159. Other data loggers
  160. QR Code generation for mobile service application
  161. Warning messages
  162. Fault messages
  164. Connecting the fieldbus to the drive
  165. Setting up the embedded fieldbus interface
  166. Setting the drive control parameters
  167. Basics of the embedded fieldbus interface
  168. Control word and Status word
  169. Register addressing
  170. About the control profiles
  171. The ABB Drives profile
  172. Status Word
  173. State transition diagram
  174. References
  175. Actual values
  176. Modbus holding register addresses
  177. The Transparent profile
  178. Modbus function codes
  179. Exception codes
  180. Coils (0xxxx reference set)
  181. Discrete inputs (1xxxx reference set)
  182. Error code registers (holding registers 400090...400100)
  184. Basics of the fieldbus control interface
  187. Contents of the fieldbus Control word (ABB Drives profile)
  188. Contents of the fieldbus Status word (ABB Drives profile)
  189. The state diagram (ABB Drives profile)
  190. Setting up the drive for fieldbus control
  191. Parameter setting example: FPBA (PROFIBUS DP)
  193. Speed reference source selection I
  194. Speed reference source selection II
  195. Speed reference ramping and shaping
  196. Motor feedback configuration
  197. Load feedback and position counter configuration
  198. Speed error calculation
  199. Speed controller
  200. Torque reference source selection and modification
  201. Operating mode selection
  202. Reference selection for torque controller
  203. Torque limitation
  204. Torque controller
  205. Frequency reference selection
  206. Frequency reference modification
  207. Process PID setpoint and feedback source selection
  208. Process PID controller
  209. Master/Follower communication I (Master)
  210. Master/Follower communication II (Follower)
  211. Product and service inquiries
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: Controller
Table of contents
  1. List of related manuals
  2. Table Of Contents
  3. Table Of Contents
  4. Contents of this chapter
  5. Target audience
  6. Abbreviations
  7. Quick reference guide for implementing a safety system
  8. Contents this chapter
  9. Operation principle
  10. Fault reaction function
  11. Wiring
  12. Start-up and acceptance test
  13. Use of the safety function
  14. Proof test interval
  15. Safety data
  16. Relevant failure modes
  17. Competence
  18. Related standards and directives
  19. Product and service inquiries
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: Controller
Table of contents
  1. List of related manuals
  2. Table Of Contents
  3. Table Of Contents
  4. Contents of this chapter
  5. Safety instructions
  6. Contents
  7. Exclusion of liability
  8. Quick reference guide for implementing a safety system
  10. Summary of wirings and settings
  11. Operation principle
  12. Operation principle diagram
  13. Wiring
  14. Use of the safety function
  15. FSE module
  17. General parameters
  18. Parameters for the SSE function
  19. FSE module and safety pulse encoder parameters
  20. Drive parameter settings
  22. Start-up and acceptance test
  24. Proof test interval
  26. Safety data values
  27. Relevant failure modes
  28. General rules, notes and definitions
  29. Related standards and directives
  30. Product and service inquiries
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: Servo Drives
Table of contents
  1. List of related manuals
  2. Table Of Contents
  3. Table Of Contents
  4. Contents of this chapter
  5. Safety instructions
  6. Contents
  7. Exclusion of liability
  8. Quick reference guide for implementing a safety system
  10. Summary of wirings and settings
  11. Operation principle
  12. Emergency stop, stop category 1 with time monitoring
  13. Emergency stop, stop category 1 with ramp monitoring
  14. Time schemes with a safety encoder
  17. Circuit diagram
  18. Wiring
  19. Use of the safety function
  20. Emergency stop indications
  21. FSE module
  23. General parameters
  24. Parameters for the STO function
  25. Parameters for the SSE function
  26. Parameters for Emergency stop, stop category 0
  27. Changing the stop category from 0 to 1
  28. FSE module and safety pulse encoder parameters
  29. Drive
  31. Settings with voltage connected
  33. Proof test interval
  35. ACS880-07/17/37 drives without the FSE module
  36. Safety component types
  37. General rules, notes and definitions
  38. Related standards and directives
  39. Product and service inquiries
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: DC Drives
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Contents of this chapter
  4. Electrical safety precautions
  6. Quick reference guide for taking a safety function into use
  7. Terms and abbreviations
  9. ACS880-07 drives, frames R6 to R11 and ACS880-17/-37 drives, frame R8
  10. ACS880-17/37 drives, frame R11
  11. ACS880-07 drives, frames nxDXT + nxR8i
  12. ACS880-17/37 and -17LC/37LC drives, frames nxR8i + nxR8i
  13. Fault reaction function
  14. Parameter settings
  15. Additional parameter settings for ACS880-07 drives, frames nxDXT + nxR8i and ACS880-17/17LC/37/37LC drives, frames nxR8i + nxR8i
  17. Customer-installed main breaker in ACS880-17LC/37LC drives
  20. Acceptance test reports
  22. ACS880-07 drives, frames R6 to R11 and ACS880-17/37 drives, frame R11
  24. Competence
  26. ACS880-07 drives with a main contactor (option +F250)
  27. ACS880-17/37 drives with a main contactor (option +F250)
  28. ACS880-07/17/17LC/37/37LC drives with a main breaker (option +F255)
  29. ACS880-17LC/37LC drives without a main breaker
  30. Diagram 2: ACS880-17/37 drives, frame R11
  31. Ambient conditions
  32. Compliance with the European Machinery Directive
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: DC Drives
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: DC Drives
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: DC Drives
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: DC Drives
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: DC Drives
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: DC Drives
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: Controller
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Table Of Contents
  9. Table Of Contents
  10. Contents of this chapter
  11. General safety in installation, start-up and maintenance
  12. Electrical safety in installation, start-up and maintenance
  13. Additional instructions and notes
  14. Grounding
  15. Additional instructions for permanent magnet motor drives
  17. Related documents
  18. Quick installation, commissioning and operation flowchart
  19. Terms and abbreviations
  20. Safety data (SIL, PL)
  22. AC voltage and current waveforms
  23. Overview circuit diagram of the drive
  24. Cabinet line-up and layout examples
  25. Frame 2×R8i + 2×R8i
  26. Frame 3×R8i + 3×R8i (with main breaker)
  27. Auxiliary control cubicle (ACU) layout
  28. Overview of power and control connections
  29. Door switches and lights
  30. Main disconnecting device [Q1.1]
  31. Control panel
  32. Descriptions of cabinet options
  33. Marine construction (option +C121)
  34. Cabinet heater with external supply (option +G300)
  35. Additional wire markings (options +G340 and +G342)
  36. Additional terminal block X504 (option +L504)
  37. Pt100 relays (options +2L506, +3L506, +5L506, +8L506)
  38. Type designation label
  40. Necessary tools
  41. Moving and unpacking the drive
  42. Lifting the crate with a crane
  43. Moving the crate with a forklift
  44. Removing the transport package
  45. Moving the cabinet on rollers
  46. Final placement of the cabinet
  47. Fastening the cabinet to the floor and wall or roof (non-marine units)
  48. Fastening methods
  49. Fastening the cabinet to the floor and roof/wall (marine units)
  50. Miscellaneous
  51. Calculating the required static pressure difference
  53. Examining the compatibility of the motor and drive
  54. Requirements table
  55. Additional requirements for explosion-safe (EX) motors
  56. Additional requirements for braking applications
  57. Additional data for calculating the rise time and the peak line-to-line voltage
  58. Typical cable sizes
  59. Output (motor) cable sizes
  60. Alternative power cable types
  61. Additional US requirements
  62. Signals in separate cables
  63. Separate control cable ducts
  64. Implementing thermal overload and short-circuit protection
  65. Residual current device compatibility
  66. Declaration of Conformity
  67. Using power factor compensation capacitors with the drive
  68. Connecting a motor temperature sensor to the drive I/O
  70. Motor and motor cable
  71. T21 and T101 tap settings (400...500 V units)
  72. T111 tap settings
  73. Connecting the control cables
  74. Routing the control cables inside the cabinet
  75. Connecting an auxiliary voltage supply (UPS, option +G307)
  76. Wiring the thermistor relay(s) (options +L505 and +2L505)
  77. Wiring the Pt100 relays (options +2L506, +3L506, +5L506 and +8L506)
  78. Powering the heating and lighting equipment (options +G300, +G301 and +G313
  79. Wiring ground fault monitoring for IT ungrounded systems (option +Q954)
  80. Connecting the motor cables (units without common motor terminal cubicle)
  81. Connection diagram (with option +H366)
  82. Procedure
  83. Removing the inverter module
  84. Connecting the motor cables
  85. Re-inserting the fan carriage of an inverter module
  86. Connecting the motor cables (units with common motor terminal cubicle)
  87. Connecting an external brake resistor assembly
  88. Connecting the input power cables
  89. Connecting a PC
  90. Panel bus (Control of several units from one control panel)
  91. Installing option modules
  92. Mechanical installation of an FSO-xx safety functions module
  93. Wiring of option modules
  94. What this chapter contains
  95. Control unit layout and connections
  96. Default I/O diagram of the inverter control unit [A41]
  97. External power supply for the control unit (XPOW)
  98. AI1 or AI2 as a Pt100 or KTY84 sensor input
  99. Safe torque off
  100. Control unit connector data
  103. Checks/Settings with no voltage connected
  104. Setting up the supply unit parameters
  107. Cabinet
  108. Cleaning the door air inlets (IP54)
  109. Heatsink
  110. Power connections and quick connectors
  111. Fans
  112. Replacing the fan(s) in the incoming cubicle
  113. Replacing a roof fan (IP54)
  114. Replacing a supply or inverter module cooling fan (speed-controlled version)
  115. Replacing the circuit board compartment fan (frame R8i)
  116. Replacing the fan of the LCL filter (BLCL-1x-x)
  117. Replacing the fan of the LCL filter (BLCL-2x-x)
  118. Supply and inverter modules
  119. LCL filter
  120. Capacitors
  121. Fuses
  123. Memory unit
  125. Definitions
  126. Derating
  127. Frame sizes and power module types
  129. DC fuses
  130. Fuses on CVAR varistor board
  131. Cooling data, noise
  132. Sine output filter data
  133. Electrical power network specification
  134. Control unit connection data
  135. Materials
  136. Applicable standards
  137. CE marking
  139. Compliance with EN 61800-3:2004
  140. Category C4
  141. CSA marking
  142. Insulation supports
  144. Cabinet line-up dimensions
  145. ACS880-37-1110A-3, -1010A-5, -1110A-5, -0660A-7, -0770A-7, -0950A-7, -1130A
  146. R8i + 3×R8i
  147. R8i + 4×R8i
  148. Dimension drawing examples
  149. Frame 1×R8i + 1×R8i, top cable entry/exit (+H351+H353)
  150. Frame 1×R8i + 1×R8i with brake choppers and resistors (+D150+D151)
  151. Frame 1×R8i + 1×R8i with sine output filter (+E206)
  152. Frame 2×R8i + 2×R8i (eg. ACS880-37-1110A-3), IP22
  153. Frame 2×R8i + 2×R8i (eg. ACS880-37-1210A-3), IP54
  154. H359), 1/2
  155. H359), 2/2
  156. H351+H353), 1/2
  157. H351+H353), 2/2
  158. Frame 3×R8i + 3×R8i, 1/2
  159. Frame 3×R8i + 3×R8i, 2/2
  160. Frame 3×R8i + 3×R8i with common motor terminal cubicle (+H359), 1/2
  161. Frame 3×R8i + 3×R8i with common motor terminal cubicle (+H359), 2/2
  162. Location and size of input terminals
  163. Frame 2×R8i + 2×R8i with main switch/disconnector (400 mm), top cable entry
  164. Frame 2×R8i + 2×R8i with main switch/disconnector (600 mm), top cable entry
  165. Units with main breaker (600 mm), bottom cable entry
  166. Location and size of output terminals (units without common motor terminal cubicle)
  167. Inverter module cubicle with two R8i modules, top cable exit
  168. Inverter module cubicle with three R8i modules, top cable exit
  169. Sine filter (+E206) cubicle, 1000 mm, top cable exit
  170. Location and size of output terminals (units with common motor terminal cubicle)
  171. Cubicle width 300 mm (double-busbar version), bottom cable exit
  172. Cubicle width 300 mm (double-busbar version), top cable exit
  173. Cubicle width 400 mm, top cable exit
  174. Cubicle width 600 mm, top cable exit
  176. Compliance with the European Machinery Directive
  177. Cable types and lengths
  178. Frame n×R8i inverter unit (internal power supply)
  179. Multiple inverter units (internal power supply)
  180. Multiple inverter units (external power supply)
  181. Operation principle
  182. Maintenance
  183. Competence
  184. Abbreviations
  186. Factory-installed brake choppers and resistors
  187. Technical data
  188. Planning the braking system
  189. Calculating the maximum braking power (Pbr)
  190. Selecting and routing the cables of a custom resistor
  191. Thermal protection of the resistors
  192. Connection procedure
  193. Product and service inquiries
ACS880-17 first page preview

ACS880-17

Brand: ABB | Category: Controller
Table of contents
  1. Safety instructions
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Table Of Contents
  9. Table Of Contents
  10. Contents of this chapter
  11. General safety in installation, start-up and maintenance
  12. Electrical safety in installation, start-up and maintenance
  13. Additional instructions and notes
  14. Grounding
  15. Additional instructions for permanent magnet motor drives
  17. Related documents
  18. Quick installation, commissioning and operation flowchart
  19. Terms and abbreviations
  21. Single-line circuit diagram of the drive
  22. Line-side converter
  23. Cabinet layout
  24. Overview of power and control connections
  25. External control cable connection terminals
  26. Door switches and lights
  27. Other devices on the door
  28. Descriptions of cabinet options
  29. Marine construction (option +C121)
  30. Empty cubicles (options +C196, +C197, +C198, +C199, +C200, +C201)
  31. Cabinet lighting (option +G301)
  32. V-meter with selector switch (option +G334)
  33. Bottom cable entry/exit (options +H350 and +H352)
  34. L536, +L537
  35. Pt100 relays (options +2L506, +3L506, +5L506, +8L506)
  36. Description
  37. Type designation key
  39. Necessary tools
  40. Moving and unpacking the drive
  41. Moving the crate with a forklift
  42. Removing the transport package
  43. Moving the cabinet on rollers
  44. Final placement of the cabinet
  45. Installing the IP54 roof (option +B055)
  46. Fastening the cabinet to the floor and wall or roof
  47. Fastening methods
  48. Fastening the cabinet to the floor and wall or roof (marine units)
  49. Miscellaneous
  50. Air outlet duct on the cabinet roof (option +C130)
  52. Protecting the motor insulation and bearings
  53. Requirements table
  54. Additional requirements for explosion-safe (EX) motors
  55. Additional requirements for ABB high-output and IP23 motors
  56. Additional data for calculating the rise time and the peak line-to-line voltage
  57. Selecting the power cables
  58. Typical cable sizes
  59. Alternative power cable types
  60. Selecting the control cables
  61. Routing the cables
  62. Continuous motor cable shield or enclosure for equipment on the motor cable
  63. Protecting the motor against thermal overload
  64. Implementing the Safe torque off function
  65. Implementing the Power-loss ride-through function
  66. Implementing a safety switch between the drive and the motor
  67. Implementing a bypass connection
  68. Implementing a motor temperature sensor connection
  69. Drive I/O, I/O extension and encoder interface modules
  71. Motor and motor cable
  72. Corner-grounded and midpoint-grounded 690 V delta systems
  73. Connecting the control cables
  74. Grounding the outer shields of the control cables at the cabinet entry
  75. Routing the control cables inside the cabinet
  76. Routing the control cables inside R11 cabinet
  77. Connecting to the drive control unit
  78. Connecting an auxiliary voltage supply (UPS, option +G307)
  79. Wiring the PTC thermistor relay(s) (options +L505, +2L505, +L513, +2L513)
  80. Wiring the Pt100 relays (option +nL506)
  81. Wiring the Pt100 relays (option +nL514)
  82. Wiring ground fault monitoring for IT ungrounded systems (option +Q954)
  83. Connecting the power cables
  84. Layout of power cable connection terminals and cable entries
  85. Connection procedure (IEC)
  86. Grounding the motor cable shield at the motor end
  87. Installing option modules
  88. Installation of safety functions modules (frame R11)
  89. Case 2: FSO-xx safety functions module next to the control unit
  91. ZCU-14 control unit
  92. Default I/O connection diagram
  93. Jumpers and switches
  94. DI6 (XDI:6) as PTC sensor input
  95. DIIL input (XD24:1)
  96. Technical data
  99. Checks/Settings with no voltage connected
  100. Setting up the line-side converter parameters
  103. Descriptions of symbols
  104. Cabinet
  105. Cleaning the door air inlets (IP54)
  106. Heatsink
  107. Fans
  108. Replacing the drive module main fans (frame R11)
  109. Replacing the LCL filter module fan
  110. Replacing the auxiliary cooling fans of the drive module (frame R11)
  111. Replacing the IP54 (UL Type12) roof fan (options +B055 and +C128, frame R11)
  112. Replacing the IP54 (UL Type 12) roof fan (option +B055, frame R11)
  113. Replacing the drive and LCL filter modules (frame R11)
  114. Replacing the LCL filter module
  115. Capacitors
  116. Fuses
  117. Control panel
  118. Replacing the control unit battery
  119. Memory unit
  120. Replacing the memory unit of the line-side converter control unit (R11)
  122. Definitions
  123. Derating
  124. Altitude derating
  125. High speed mode
  126. Dimensions and weights
  127. Free space requirements
  128. Cooling data, noise
  129. Sine output filter data
  130. Terminal data for the drive control unit
  131. Control unit connection data
  132. Auxiliary circuit power consumption
  133. Applicable standards
  134. CE marking
  135. Compliance with EN 61800-3:2004
  136. Category C4
  137. Tightening torques
  138. Disclaimers
  139. What this chapter contains
  140. R11 (IP22, UL Type 1, IP42, UL Type 1 Filtered, option +B054)
  141. R11 (IP54, UL Type 12, option +B055)
  142. R11 (IP22, UL Type 1, IP42, UL Type 1 Filtered, options +C129, +H350, +H352)
  143. R11 (IP54, UL Type 12, options +B055, +C128)
  144. R11 (IP54, UL Type 12, options +B055, +C129)
  145. R11 (IP54, UL Type 12, options +B055, +C129, +H350, +H352)
  146. R11 (IP22, UL Type 1, IP42, UL Type 1 Filtered, option +D150)
  147. R11 (IP22, UL Type 1, IP42, UL Type 1 Filtered, options +D150 +D151)
  148. R11 (IP22, UL Type 1, IP42, UL Type 1 Filtered, option +E206)
  149. Location and size of power cable connection terminals
  150. R11 input and motor cable terminal dimensions – top entry and exit
  151. Input cable terminals (R11)
  152. Sine filter (+E206) cubicle, 400 mm
  153. Sine filter (+E206) cubicle, 1000 mm
  155. Compliance with the European Machinery Directive
  156. Cable types and lengths
  157. Single drive (internal power supply)
  158. Multiple drives (internal power supply)
  159. Multiple drives (external power supply)
  160. Start-up including acceptance test
  161. Maintenance
  162. Competence
  163. Abbreviations
  164. Declaration of conformity
  165. Product and service inquiries
Related products
ACS880-11ACS880-14ACS880-107ACS880-104ACS880-07ACS880-37ACS800-17ACS880-34ACS880-04XTACS880-01-156A-5
ABB categories
Industrial Equipment
DC Drives
Controller
Relays
Measuring Instruments
Circuit breakers
Battery Charger
Industrial Electrical
Transformer
Switch
More ABB categories
Manuals database logo
manualsdatabase
Your AI-powered manual search engine