Genie Z-60/34 manuals
Z-60/34
Table of contents
- Introduction
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Machine Specifications
- Hydraulic Specifications
- Manifold Component Specifications
- Machine Torque Specifications
- Hydraulic Hose and Fitting Torque Specifications
- Pre-Delivery Preparation
- Maintenance Inspection Report
- A-1 Perform Pre-operation Inspection
- A-3 Perform Engine Maintenance - Ford Models
- A-5 Perform Function Tests
- A-7 Check the High Pressure Hydraulic Filter Condition Indicator
- A-9 Perform 30 Day Service
- A-11 Replace the Fuel Filters - Ford Models
- A-12 Inspect the Fuel Filter/Water Separator - Deutz Models
- A-13 Grease the Turntable Rotation Bearing and Rotate Gear
- A-15 Perform Engine Maintenance - Ford Models
- B-1 Inspect the Battery
- B-2 Inspect the Electrical Wiring
- B-3 Test the Key Switch
- B-5 Check the Exhaust System
- B-6 Check the Oil Cooler and Cooling Fins - Deutz Models
- B-7 Check the Lug Nut Torque (including the tires and wheels)
- B-8 Confirm the Proper Brake Configuration
- B-10 Check and Adjust the Engine RPM
- B-11 Test the Ground Control Override
- B-12 Check the Directional Valve Linkage
- B-14 Test the Engine Idle Select
- B-15 Test the Fuel Select Operation - Ford Models
- B-16 Test the Drive Brakes
- B-17 Test the Drive Speed - Stowed Position
- B-19 Test the Alarm Package (if equipped)
- B-20 Perform Hydraulic Oil Analysis
- B-21 Replace the Hydraulic Filters
- B-22 Perform Engine Maintenance - Deutz Models
- B-23 Perform Engine Maintenance - Ford Models
- C-1 Perform Engine Maintenance - Deutz Models
- C-4 Perform Engine Maintenance - Ford Models
- D-1 Check the Boom Wear Pads
- D-3 Check the Free-wheel Configuration
- D-4 Check and Adjust the Air/LPG Mixture - Ford Models
- D-5 Perform Engine Maintenance - Deutz Models
- E-1 Test or Replace the Hydraulic Oil
- E-3 Perform Engine Maintenance - Deutz Models
- ALC-500 Circuit Board
- Joysticks
- Platform Leveling Slave Cylinder
- Platform Rotator
- Jib Boom
- Jib Boom Lift Cylinder
- Jib Boom / Platform Rotate Manifold Components before serial number 4461
- Cable Track
- Primary Boom
- Primary Boom Lift Cylinder
- Primary Boom Extension Cylinder
- Platform Leveling Master Cylinder
- Secondary Boom
- Secondary Boom Lift Cylinders
- RPM Adjustment
- Engine Fault Codes - Ford Models
- Lift/Steer Pump
- Function Manifold Components - (after serial number 4460)
- Valve Adjustments - Function Manifold
- Turntable Rotation Manifold Components
- Directional Valve Manifold Components
- WD Drive Manifold Components
- Valve Adjustments, 2WD Drive Manifold
- Valve Adjustments, 4WD Drive Manifold
- Valve Coils, How to Test a Coil
- Turntable Rotation Assembly
- Hub and Bearings, 2WD Models
- Fault Codes - Control System
- Hydraulic Symbols Legend
manualsdatabase
Your AI-powered manual search engine