23-9To do… Use the command… RemarksConfigure the operation type operation { get | put }OptionalBy default, the operation type forthe FTP is get, that is, obtainingfiles from the FTP server.Configure a login username username nameRequiredBy default, no login username isconfigured.Configure a login password password passwordRequiredBy default, no login password isconfigured.Specify a file to be transferredbetween the FTP server andthe FTP clientfilename file-name RequiredBy default, no file is specified.Configure common optionalparametersSee Configuring OptionalParameters Common toan NQA Test GroupOptionalz When you execute the put command, a file file-name with fixed size and content is created on theFTP server; when you execute the get command, the device does not save the files obtained fromthe FTP server.z When you execute the get command, the FTP test cannot succeed if a file named file-name doesnot exist on the FTP server.z When you execute the get command, please use a file with a smaller size as a big file may resultin test failure because of timeout, or may affect other services because of occupying too muchnetwork bandwidth.Configuring an HTTP TestAn HTTP test is used to test the connection between the NQA client and a specified HTTP server andthe time required to obtain data from the HTTP server, thus detecting the connectivity and performanceof the HTTP server.Configuration prerequisitesBefore performing an HTTP test, you need to configure the HTTP server.Configuring an HTTP testFollow these steps to configure an HTTP test:To do… Use the command… RemarksEnter system view system-view —Enter NQA test group view nqa entry admin-nameoperation-tag —
