22-10To do… Use the command… RemarksConfigure the output rules ofthe system informationinfo-center source{ module-name | default }channel { channel-number |channel-name } [ debug { levelseverity | state state } * | log{ level severity | state state } * |trap { level severity | statestate } * ] *OptionalRefer to Default output rules ofsystem information.Configure the format of thetime stampinfo-center timestamp{ debugging | log | trap }{ boot | date | none }OptionalThe time stamp format for log,trap and debugging informationis date by default.Outputting System Information to the Log BufferYou can configure to output log, trap, and debugging information to the log buffer, but the log bufferreceives the log and debugging information only, and discards the trap information.To do… Use the command… RemarksEnter system view system-view —Enable information center info-center enable OptionalEnabled by default.Name the channel with aspecified channel numberinfo-center channelchannel-number namechannel-nameOptionalRefer to Table 22-2 for defaultchannel names.Configure the channel throughwhich system information canbe output to the log buffer andspecify the buffer sizeinfo-center logbuffer[ channel { channel-number |channel-name } | sizebuffersize ] *OptionalBy default, system informationis output to the log bufferthrough channel 4 (known aslogbuffer) and the default buffersize is 512.Configure the output rules ofthe system informationinfo-center source{ module-name | default }channel { channel-number |channel-name } [ debug { levelseverity | state state } * | log{ level severity | state state } * |trap { level severity | statestate } * ] *OptionalRefer to Default output rules ofsystem information.Configure the format of thetimestampinfo-center timestamp{ debugging | log | trap }{ boot | date | none }OptionalThe time stamp format for log,trap and debugging informationis date by default.