5-5Task RemarksConfigure WRR Queuing OptionalConfiguring WFQ Queuing OptionalConfiguring SP+WRR Queues OptionalConfiguring Congestion ManagementConfiguring SP QueuingConfiguration procedureFollow these steps to configure SP queuing:To do… Use the command… RemarksEnter system view system-view —Enterinterfaceviewinterface interface-typeinterface-numberEnterinterfaceview or portgroup view Enter portgroup viewport-group manualport-group-nameUse either commandSettings in interface view take effecton the current interface; settings inport group view take effect on allports in the port group.Configure SP queuing qos spRequiredBy default, all the ports adopt theWRR queue scheduling algorithm,with the weight values assigned toqueue 0 through queue 7 being 1, 2,3, 4, 5, 9, 13, and 15.Configuration example1) Network requirementsConfigure GigabitEthernet 1/0/1 to use SP queuing.2) Configuration procedure# Enter system view system-view# Configure GigabitEthernet1/0/1 to use SP queuing.[Sysname]interface gigabitethernet 1/0/1[Sysname-GigabitEthernet1/0/1] qos spConfigure WRR QueuingConfiguration procedureFollow these steps to configure group-based WRR queuing:To do… Use the command… RemarksEnter system view system-view —
