5-11# Create VLAN 10, assign GigabitEthernet 1/0/1 to VLAN 10, and enable MLD Snooping in this VLAN.[SwitchA] vlan 10[SwitchA-vlan10] port gigabitethernet 1/0/1[SwitchA-vlan10] mld-snooping enable[SwitchA-vlan10] quit# Create VLAN 2 and enable MLD Snooping in the VLAN.[SwitchA] vlan 2[SwitchA-vlan2] mld-snooping enable[SwitchA-vlan2] quitThe configuration for VLAN 3 and VLAN 4 is similar. The detailed configuration steps are omitted.# Configure GigabitEthernet 1/0/2 as a hybrid port. Configure VLAN 2 as the default VLAN. ConfigueGigabitEthernet 1/0/2 to permit packets of VLAN 2 to pass and untag the packets when forwardingthem.[SwitchA] interface gigabitethernet 1/0/2[SwitchA-GigabitEthernet1/0/2] port link-type hybrid[SwitchA-GigabitEthernet1/0/2] port hybrid pvid vlan 2[SwitchA-GigabitEthernet1/0/2] port hybrid vlan 2 untagged[SwitchA-GigabitEthernet1/0/2] port hybrid vlan 10 untagged[SwitchA-GigabitEthernet1/0/2] quitThe configuration for GigabitEthernet 1/0/3 and GigabitEthernet 1/0/4 is similar. The detailedconfiguration steps are omitted.# Configure VLAN 10 as an IPv6 multicast VLAN.[SwitchA] multicast-vlan ipv6 10# Assign GigabitEthernet 1/0/2 and GigabitEthernet 1/0/3 to IPv6 multicast VLAN 10.[SwitchA-ipv6-mvlan-10] port gigabitethernet 1/0/2 to gigabitethernet 1/0/3[SwitchA-ipv6-mvlan-10] quit# Assign GigabitEthernet 1/0/4 to IPv6 multicast VLAN 10.[SwitchA] interface gigabitethernet 1/0/4[SwitchA-GigabitEthernet1/0/4] port multicast-vlan ipv6 10[SwitchA-GigabitEthernet1/0/4] quit4) Verify the configuration# View the IPv6 multicast VLAN information on Switch A.[SwitchA] display multicast-vlan ipv6Total 1 IPv6 multicast-vlan(s)IPv6 Multicast vlan 10subvlan list:no subvlanport list:GE1/0/2 GE1/0/3 GE1/0/4# View the MLD Snooping multicast group information on Switch A.[SwitchA] display mld-snooping groupTotal 1 IP Group(s).Total 1 IP Source(s).
