1-30You can specify up to eight security policy servers for a RADIUS scheme.Enabling the Listening Port of the RADIUS ClientFollow these steps to enable the listening port of the RADIUS client:To do… Use the command… RemarksEnter system view system-view —Enable the listening port of the RADIUSclient radius client enable OptionalEnabled by defaultDisplaying and Maintaining RADIUSTo do… Use the command… RemarksDisplay the configurationinformation of a specifiedRADIUS scheme or all RADIUSschemesdisplay radius scheme[ radius-scheme-name ] [ slotslot-number ]Available in anyviewDisplay statistics about RADIUSpacketsdisplay radius statistics [ slotslot-number ]Available in anyviewDisplay information aboutbuffered stop-accountingrequests that get no responsesdisplay stop-accounting-buffer{ radius-scheme radius-server-name |session-id session-id | time-rangestart-time stop-time | user-nameuser-name } [ slot slot-number ]Available in anyviewClear RADIUS statistics reset radius statistics [ slotslot-number ]Available in userviewClear buffered stop-accountingrequests that get no responsesreset stop-accounting-buffer{ radius-scheme radius-server-name |session-id session-id | time-rangestart-time stop-time | user-nameuser-name } [ slot slot-number ]Available in userviewConfiguring HWTACACSDifferent from RADIUS, except for deleting HWTACACS schemes and changing the IP addresses ofthe HWTACACS servers, you can make any changes to HWTACACS parameters, whether there areusers online or not.