3-83) Configure priority marking# Mark the HTTP traffic of the management department, marketing department, and R&D departmentto the Internet with 802.1p priorities 4, 5, and 3 respectively. Use the priority mapping table configuredabove to map the 802.1p priorities to local precedence values 6, 4, and 2 respectively for differentiatedtraffic treatment.# Create ACL 3000 to match HTTP traffic.[Device] acl number 3000[Device-acl-adv-3000] rule permit tcp destination-port eq 80[Device-acl-adv-3000] quit# Create class http and reference ACL 3000 in the class.[Device] traffic classifier http[Device-classifier-http] if-match acl 3000[Device-classifier-http] quit# Configure a priority marking policy for the management department and apply the policy to theincoming traffic of GigabitEthernet 1/0/3.[Device] traffic behavior admin[Device-behavior-admin] remark dot1p 4[Device-behavior-admin] quit[Device] qos policy admin[Device-qospolicy-admin] classifier http behavior admin[Device-qospolicy-admin] quit[Device] interface gigabitethernet 1/0/3[Device-GigabitEthernet1/0/3] qos apply policy admin inbound# Configure a priority marking policy for the marketing department and apply the policy to the incomingtraffic of GigabitEthernet 1/0/1.[Device] traffic behavior market[Device-behavior-market] remark dot1p 5[Device-behavior-market] quit[Device] qos policy market[Device-qospolicy-market] classifier http behavior market[Device-qospolicy-market] quit[Device] interface gigabitethernet 1/0/1[Device-GigabitEthernet1/0/1] qos apply policy market inbound# Configure a priority marking policy for the R&D department and apply the policy to the incomingtraffic of GigabitEthernet 1/0/2.[Device] traffic behavior rd[Device-behavior-rd] remark dot1p 3[Device-behavior-rd] quit[Device] qos policy rd[Device-qospolicy-rd] classifier http behavior rd[Device-qospolicy-rd] quit[Device] interface gigabitethernet 1/0/2[Device-GigabitEthernet1/0/2] qos apply policy rd inbound
