23-30Min positive SD: 3 Min positive DS: 1Max positive SD: 30 Max positive DS: 79Positive SD number: 186 Positive DS number: 158Positive SD sum: 2602 Positive DS sum: 1928Positive SD average: 13 Positive DS average: 12Positive SD square sum: 45304 Positive DS square sum: 31682Min negative SD: 1 Min negative DS: 1Max negative SD: 30 Max negative DS: 78Negative SD number: 181 Negative DS number: 209Negative SD sum: 181 Negative DS sum: 209Negative SD average: 13 Negative DS average: 14Negative SD square sum: 46994 Negative DS square sum: 3030One way results:Max SD delay: 46 Max DS delay: 46Min SD delay: 7 Min DS delay: 7Number of SD delay: 410 Number of DS delay: 410Sum of SD delay: 3705 Sum of DS delay: 3891Square sum of SD delay: 45987 Square sum of DS delay: 49393SD lost packet(s): 0 DS lost packet(s): 0Lost packet(s) for unknown reason: 0The display nqa history command cannot show you the results of UDP jitter tests. Therefore, to knowthe result of a UDP jitter test, you are recommended to use the display nqa result command to viewthe probe results of the latest NQA test, or use the display nqa statistics command to view thestatistics of NQA tests.SNMP Test Configuration ExampleNetwork requirementsUse the NQA SNMP query function to test the time it takes for Device A to send an SNMP query packetto the SNMP agent and receive a response packet.Figure 24-8 Network diagram for SNMP testsConfiguration procedure1) Configurations on SNMP agent.# Enable the SNMP agent service and set the SNMP version to all, the read community to public, andthe write community to private.
