14-8To do… Use the command… RemarksCopy an existing IPv4 ACL togenerate a new one of thesame typeacl copy { source-acl-number | namesource-acl-name } to { dest-acl-number| name dest-acl-name }Requiredz The source IPv4 ACL and the destination IPv4 ACL must be of the same type.z The destination ACL does not take the name of the source IPv4 ACL.Displaying and Maintaining IPv4 ACLsTo do... Use the command… RemarksDisplay information about one or all IPv4ACLsdisplay acl { acl-number | all |name acl-name }Available in anyviewDisplay information about ACL uses of aswitch display acl resource Available in anyviewDisplay the configuration and state of aspecified or all time rangesdisplay time-range{ time-range-name | all }Available in anyviewClear statistics about a specified or allIPv4 ACLs that are referenced by upperlayer softwarereset acl counter { acl-number |all | name acl-name }Available in userviewIPv4 ACL Configuration ExampleNetwork RequirementsAs shown in Figure 14-1, a company interconnects its departments through the switch.Configure an ACL to deny access of all departments but the President’s office to the salary queryserver during office hours (from 8:00 to 18:00) in working days.
