11-2Creating a User ProfileConfiguration PrerequisitesBefore creating a user profile, you need to configure authentication parameters. User profile supports802.1X authentications. You need to perform the related configurations (for example, username,password, authentication scheme, domain and binding between a user profile and user) on the client,the device and authentication server.Creating a User ProfileFollow these steps to create a user profile:To do… Use the command… RemarksEnter system view system-view —Create a user profile, and enter thecorresponding user profile viewuser-profileprofile-name dot1xRequiredIf the specified user profilealready exists, you will directlyenter the corresponding userprofile view.The configuration made in userprofile view takes effect whenthe user profile is enabled andthe corresponding users areonline.Refer to 802.1x Configuration in the Security Volume for detailed information about 802.1xauthentication.Applying a QoS Policy to User ProfileAfter a user profile is created, you need to configure detailed items in user profile view to implementrestrictions on the online users. Currently supported configurations are as follows:Follow these steps to apply a QoS policy to traffic of online users:To do… Use the command… RemarksEnter system view system-view —Enter user profile view user-profile profile-name[ dot1x ]RequiredThe configuration made inuser profile view takes effectwhen the user-profile is activeand the corresponding usersare online.Apply the QoS policy qos apply policy policy-name{ inbound | outbound } Required
