1-13Configuration procedure# Define ACL 2001. system-view[device] acl number 2001[device-acl-basic-2001] rule 1 permit source 10.110.100.46 0[device-acl-basic-2001] quit# Reference ACL 2001 to control users logging in to the Web server.[device] ip http acl 2001Examples for Applying ACLs to HardwareBasic ACL Configuration ExampleNetwork requirementsAs shown in Figure 1-3, PC1 and PC2 connect to Switch through GigabitEthernet 1/0/1. PC1’s IPaddress is 10.1.1.1. Apply an ACL on GigabitEthernet 1/0/1 to deny packets with the source IP addressof 10.1.1.1 from 8:00 to 18:00 everyday.Figure 1-3 Network diagram for basic ACL configurationSwitchTo the routerGEth1/0/1PC110.1.1.1PC2Configuration procedure# Define a periodic time range that is active from 8:00 to 18:00 everyday. system-view[device] time-range test 8:00 to 18:00 daily# Define ACL 2000 to filter packets with the source IP address of 10.1.1.1.[device] acl number 2000[device-acl-basic-2000] rule 1 deny source 10.1.1.1 0 time-range test[device-acl-basic-2000] quit# Apply ACL 2000 on GigabitEthernet 1/0/1.[device] interface GigabitEthernet1/0/1[device-GigabitEthernet1/0/1] packet-filter inbound ip-group 2000Advanced ACL Configuration ExampleNetwork requirementsAs shown in Figure 1-4, different departments of an enterprise are interconnected through Switch. TheIP address of the wage query server is 192.168.1.2. The R&D department is connected to
