1-9To do… Use the command… RemarksConfigure the destination IPaddress destination-ip ip-addressRequiredYou can configure an IPaddress or a host name.By default, no destinationaddress is configured.Configure dns-server dns-server ip-addressRequired when you use thedestination-ip command toconfigure the destinationaddress as the host name.By default, no IP address of theDNS server is configured.Configure the source IPaddress source-ip ip-addressOptionalBy default, no source IPaddress is configured.Configure the source port source-port port-numberOptionalBy default, no source port isconfigured.Configure the test type test-type httpRequiredBy default, the test type isICMP.Configure the number ofprobes per test count timesOptionalBy default, each test makesone probe.Configure the maximumnumber of history records thatcan be savedhistory-records numberOptionalBy default, the maximumnumber is 50.Configure the automatic testinterval frequency intervalOptionalBy default, the automatic testinterval is zero seconds,indicating no automatic test willbe made.Configure the probe timeouttime timeout timeOptionalBy default, a probe times out inthree seconds.Configure the type of service tos valueOptionalBy default, the service type iszero.Configure the type of HTTPoperation http-operation { get | post }OptionalBy default, the type of HTTPoperation is get, that is, theHTTP operation will get datafrom the HTTP server.Start the test test-enable RequiredDisplay test results display hwping results[ admin-name operation-tag ]RequiredYou can execute the commandin any view.
