1-4Test parameter DescriptionFile name for FTP operation(filename)Name of a file to be transferred between HWPing clientand FTP serverNumber of jitter test packets to be sentper probe (jitter-packetnum)z Jitter test is used to collect statistics about delay jitter inUDP packet transmissionz In a jitter probe, the HWPing client sends a series ofpackets to the HWPing server at regular intervals (youcan set the interval). Once receiving such a packet, theHWPing server marks it with a timestamp, and thensends it back to the HWPing client. Upon receiving apacket returned, the HWPing client computes the delayjitter time. The HWPing client collects delay jitterstatistics on all the packets returned in the test. So, themore packets a jitter probe sends, the more accuratethe jitter statistics is, but the longer time the jitter testcosts.Interval to send jitter test packets(jitter-interval)Each jitter probe will send multiple UDP test packets atregular intervals (you can set the interval). The smaller theinterval is, the faster the test is. But a too small intervalmay somewhat impact your network.Trapz A HWPing test will generate a Trap message no matterwhether the test successes or not. You can use theTrap device to enable or disable the output of trapmessages.z You can set the number of consecutive failed HWPingtests before Trap output. You can also set the numberof consecutive failed HWPing probes before Trapoutput.HWPing ConfigurationThe TCP/UDP/jitter tests need the cooperation of HWPing client and HWPing Server, Other types oftests need to configure HWPing client and corresponding different servers.Configuration on a HWPing ServerYou can enable both the HWPing client and HWPing server functions on a device, that is, the devicecan serve as a HWPing client and server simultaneously.HWPing server configuration tasksComplete the following tasks to configure the HWPing server:Task RemarksEnable the HWPing serverfunctionThe HWPing server function is needed only for jitter,TCP, and UDP tests.HWPingserverconfiguration Configure a listeningservice on the HWPingserverYou can configure multiple TCP/UDP listeningservices on one HWPing server, with each listeningservice corresponding to a specific destination IPaddress and port number.
