1-10[DeviceA] voice vlan aging 100# Add a user-defined OUI address 0011-2200-000 and set the description string to “test”.[DeviceA] voice vlan mac-address 0011-2200-0000 mask ffff-ff00-0000 description test# Enable the voice VLAN function globally.[DeviceA] voice vlan 2 enable# Configure the vocie VLAN to operate in automatic mode on GigabitEthernet 1/0/1. This operation isoptional. By default, a voice VLAN operates in automatic mode on a port.[DeviceA] interface GigabitEthernet 1/0/1[DeviceA-GigabitEthernet1/0/1] voice vlan mode auto# Configure GigabitEthernet 1/0/1 as a hybrid port.[DeviceA-GigabitEthernet1/0/1] port link-type hybrid# Configure VLAN 6 as the default VLAN of GigabitEthernet 1/0/1, and configure GigabitEthernet 1/0/1to permit packets with the tag of VLAN 6.[DeviceA-GigabitEthernet1/0/1] port hybrid pvid vlan 6[DeviceA-GigabitEthernet1/0/1] port hybrid vlan 6 tagged# Enable the voice VLAN function on GigabitEthernet 1/0/1.[DeviceA-GigabitEthernet1/0/1] voice vlan enableVoice VLAN Configuration Example (Manual Mode)Network requirementsCreate a voice VLAN and configure it to operate in manual mode. Add the port to which an IP phone isconnected to the voice VLAN to enable voice traffic to be transmitted within the voice VLAN, as shownin Figure 1-3.z Create VLAN 2 and configure it as a voice VLAN. Set the voice VLAN to operate in security modez The IP phone sends untagged packets. It is connected to GigabitEthernet 1/0/1, a hybrid port. Setthis port to operate in manual mode.z You need to add a user-defined OUI address 0011-2200-000, with the mask being ffff-ff00-0000and the description string being “test”.Figure 1-3 Network diagram for voice VLAN configuration (manual mode)InternetDevice AGEth1/0/1VLAN2VLAN2010- 1001OUI: 0011- 2200- 0000Mask:ffff-ff00- 0000Device BConfiguration procedure# Enable the security mode for the voice VLAN so that the ports in the voice VLAN permit valid voicepackets only. This operation is optional. The security mode is enabled by default.
