1-18[Switch] info-center enable# Disable the function of outputting information to the console channels.[Switch] undo info-center source default channel console# Enable log information output to the console. Permit ARP and IP modules to output log informationwith severity level higher than informational to the console.[Switch] info-center console channel console[Switch] info-center source arp channel console log level informational debug state off trapstate off[Switch] info-center source ip channel console log level informational debug state off trapstate off# Enable terminal display. terminal monitor terminal loggingConfiguration ExampleNetwork requirementsz As shown in Figure 1-4, the device is in the time zone of GMT+ 08:00:00.z The time stamp format of output log information is date.z UTC time zone will be added to the output information of the information center.Figure 1-4 Network diagramInternetPCSwitchConfiguration procedure# Name the local time zone z8 and configure it to be eight hours ahead of UTC time. clock timezone z8 add 08:00:00# Set the time stamp format of the log information to be output to the log host to date. system-viewSystem View: return to User View with Ctrl+Z.[Switch] info-center timestamp loghost date# Configure to add UTC time to the output information of the information center.[Switch] info-center timestamp utc
