1-2Connected to OAP! ftp 192.168.0.100Trying ...Press CTRL+K to abortConnected.220 3Com 3CDaemon FTP Server Version 2.0User(none):admin331 User name ok, need passwordPassword:230 User logged in[ftp]get config.cfg config.cfg227 Entering passive mode (192,168,0,100,5,95)125 Using existing data connection..........226 Closing data connection; File transfer successful.FTP: 7590 byte(s) received in 15.139 second(s) 501.00 byte(s)/sec.[ftp] byeWhen using different FTP server software on PC, different information will be output to the device.Step 2: Update the host configuration file on Switch. startup saved-configuration config.cfg mainPlease wait........................................Done!Step 3: Restart Switch. rebootBefore restarting Switch, make sure you have saved all other configurations that you want, so as toavoid losing configuration information.Loading procedure using FTP serverAs shown in Figure 1-2, Switch is used as the FTP server. You can telnet to Switch, and then executethe FTP commands to upload the configuration file config.cfg to Switch.
