Table 214:Description of the input-output relationshipVALID OPEN CLOSE POSITIONValue Description0 - - 0 Intermediate1 0 0 0 Intermediate1 1 0 1 Open1 0 1 2 Closed1 1 1 3 Bad State12.8 Single point generic control 8 signals SPC8GAPCSEMOD176448-1 v312.8.1 IdentificationSEMOD176456-2 v3Function description IEC 61850identificationIEC 60617identificationANSI/IEEE C37.2device numberSingle point generic control 8 signals SPC8GAPC - -12.8.2 Functionality SEMOD176462-4 v10The Single point generic control 8 signals (SPC8GAPC) function block is acollection of 8 single point commands that can be used for direct commands forexample reset of LEDs or putting IED in "ChangeLock" state from remote. In thisway, simple commands can be sent directly to the IED outputs, withoutconfirmation. Confirmation (status) of the result of the commands is supposed tobe achieved by other means, such as binary inputs and SPGAPC function blocks.The commands can be pulsed or steady with a settable pulse time.12.8.3 Function block SEMOD176479-4 v5SPC8GAPCBLOCKPSTO^OUT1^OUT2^OUT3^OUT4^OUT5^OUT6^OUT7^OUT8IEC07000143-3-en.vsdIEC07000143 V3 EN-USFigure 189: SPC8GAPC function blockSection 12 1MRK 505 394-UEN AControl392 Line differential protection RED650 2.2 IECTechnical manual
