22.4.4.2 Mounting procedure for side-by-side rack mounting M11955-2 v3IEC040004563enOriginal.vsdx12343IEC04000456 V3 EN-USFigure 403: Side-by-side rack mounting details.The required torque for the screws is 3.5 Nm.PosNo Description Quantity Type1 Mounting plate 2 -2, 3 Screw 16 M4x64 Mounting angle 2 -5 Washer 16 M4x622.4.4.3 IED mounted with a RHGS6 case M11953-3 v4A 1/2 x 19” size IED can be mounted with a RHGS case (6 or 12). The RHGS casecan be used for mounting a test switch of type RTXP 24. It also has enough spacefor a terminal base of RX 2 type for mounting of, for example, a DC-switch or twoauxiliary relays.1MRK 505 394-UEN A Section 22IED hardwareLine differential protection RED650 2.2 IEC 857Technical manual