PID-6737-OUTPUTSIGNALS v2Table 352:VNMMXU Output signalsName Type DescriptionUL1 REAL UL1 Amplitude, magnitude of reported valueUL1RANG INTEGER UL1 Amplitude rangeUL1ANGL REAL UL1 Angle, magnitude of reported valueUL2 REAL UL2 Amplitude, magnitude of reported valueUL2RANG INTEGER UL2 Amplitude rangeUL2ANGL REAL UL2 Angle, magnitude of reported valueUL3 REAL UL3 Amplitude, magnitude of reported valueUL3RANG INTEGER UL3 Amplitude rangeUL3ANGL REAL UL3 Angle, magnitude of reported value15.1.5 Settings SEMOD130322-4 v7The available setting parameters of the measurement function (MMXU, MSQI) aredepending on the actual hardware (TRM) and the logic configuration made inPCM600.These six functions are not handled as a group, so parameter settings are onlyavailable in the first setting group.The following terms are used in the Unit and Description columns:• UBase (UB): Base voltage in primary kV. This voltage is used as reference forvoltage setting. It can be suitable to set this parameter to the rated primaryvoltage supervised object.• IBase (IB): Base current in primary A. This current is used as reference forcurrent setting. It can be suitable to set this parameter to the rated primarycurrent of the supervised object.• SBase (SB): Base setting for power values in MVA.PID-6713-SETTINGS v3Table 353:CVMMXN Non group settings (basic)Name Values (Range) Unit Step Default DescriptionSLowLim 0.0 - 2000.0 %SB 0.1 80.0 Low limit in % of SBaseSLowLowLim 0.0 - 2000.0 %SB 0.1 60.0 Low Low limit in % of SBaseSMin 0.0 - 2000.0 %SB 0.1 50.0 Minimum value in % of SBaseSMax 0.0 - 2000.0 %SB 0.1 200.0 Maximum value in % of SBaseSRepTyp CyclicDeadbandInt deadbandDb & Cyclic 5sDb & Cyclic 30sDb & Cyclic 1min- - Cyclic Reporting typeTable continues on next pageSection 15 1MRK 505 394-UEN AMonitoring504 Line differential protection RED650 2.2 IECTechnical manual
