Memory Seat and MirrorsIf your vehicle has the memory feature, you canprogram and recall memory settings for the driver’sseating and outside rearview mirror drivingpositions for up to two drivers. If your vehicle hasthe adjustable throttle and brake pedal feature,you can also program and recall memory settingsfor the throttle and brake pedal driving positions.The buttons for this feature are located on thedriver’s door armrest.Use the following steps to program the buttons:1. Adjust the driver’s seat including the seatbackrecliner, both outside mirrors, and the throttleand brake pedals. See Outside PowerHeated Mirrors on page 137 and AdjustableThrottle and Brake Pedal on page 120for more information.2. Press and hold button 1 for at leastthree seconds.Two beeps will sound to confirm that the seatand mirror positions have been saved.3. Repeat the procedure for a second driverusing button 2.The vehicle must be in PARK (P) to recall thestored driving positions.Press one of the numbered memory buttons torecall the stored setting. Each time a memorybutton is pressed, a single beep will sound.A chime will sound and the setting will not berecalled if you press button 1 or 2 when the vehicleis not in PARK (P).If you would like the stored driving positions to berecalled when unlocking your vehicle with theremote keyless entry transmitter or when you placethe key in the ignition, see DIC VehicleCustomization on page 231.To stop recall movement of the memory feature atany time, press one of the power seat or mirrorcontrols.12
