Universal Home Remote SystemOperation (With One Triangular LED)Your vehicle may have the Universal HomeRemote System. If there is one triangular LightEmitting Diode (LED) above the UniversalHome Remote buttons, follow the instructionsbelow. If your vehicle has three round LED abovethe Universal Home Remote buttons, follow theinstructions under Universal Home Remote SystemOperation (With three round LED).Do not use the Universal Home Remote with anygarage door opener that does not have thestop and reverse feature. This includes any garagedoor opener model manufactured before April 1,1982. If you have a newer garage door openerwith rolling codes, please be sure to follow Steps6 through 8 to complete the programming ofyour Universal Home Remote Transmitter.Read the instructions completely before attemptingto program the Universal Home Remote.Because of the steps involved, it may be helpful tohave another person available to assist you inthe programming steps.Keep the original hand-held transmitter for use inother vehicles as well as for future UniversalHome Remote programming. It is alsorecommended that upon the sale of the vehicle,the programmed Universal Home Remote buttonsshould be erased for security purposes. See“Erasing Universal Home Remote Buttons” later inthis section or, for assistance, see CustomerAssistance Offices on page 491.Be sure that people and objects are clear of thegarage door or gate operator you areprogramming. When programming a garage door,it is advised to park outside of the garage.It is recommended that a new battery be installedin your hand-held transmitter for quicker andmore accurate transmission of the radio-frequencysignal.150
