How to Check Power Steering FluidTo check the power steering fluid, do the following:1. Turn the key off and let the enginecompartment cool down.2. Wipe the cap and the top of the reservoir clean.3. Unscrew the cap and wipe the dipstick with aclean rag.4. Replace the cap and completely tighten it.5. Remove the cap again and look at thefluid level on the dipstick.The level should be within the HOT mark. Ifnecessary, add only enough fluid to bring the levelwithin the mark.What to UseTo determine what kind of fluid to use, seeRecommended Fluids and Lubricants on page 480.Always use the proper fluid. Failure to use theproper fluid can cause leaks and damage hosesand seals.Windshield Washer FluidWhat to UseWhen you need windshield washer fluid, be sure toread the manufacturer’s instructions before use. Ifyou will be operating your vehicle in an area wherethe temperature may fall below freezing, use a fluidthat has sufficient protection against freezing.Adding Washer FluidThe WASHER FLUID LOW ADD FLUID messagewill appear on the Driver Information Center (DIC)when the fluid level is low. See DIC Warnings andMessages on page 220 for more information.Open the cap with thewasher symbol on it.Add washer fluiduntil the tank is full. SeeEngine CompartmentOverview on page 356for reservoir location.380
