5. To tighten the belt, pull up on the shoulderbelt while you push down on the childrestraint. You may find it helpful to use yourknee to push down on the child restraintas you tighten the belt.6. Push and pull the child restraint in differentdirections to be sure it is secure.7. If the airbag is off, the off indicator in theinstrument panel will be lit and stay litwhen the key is turned to ON or START.If a child restraint has been installed and the onindicator is lit, turn the vehicle off. Removethe child restraint from the vehicle and reinstall thechild restraint.If, after reinstalling the child restraint and restartingthe vehicle, the on indicator is still lit, check tomake sure that the vehicle’s seatback is notpressing the child restraint into the seat cushion. Ifthis happens, slightly recline the vehicle’sseatback and adjust the seat cushion if possible.Also make sure the child restraint is not trappedunder the vehicle head restraint. If this happens,adjust the head restraint.If the on indicator is still lit, secure the child in thechild restraint in a rear seat position in thevehicle and check with your dealer.To remove the child restraint, unbuckle thevehicle’s safety belt and let it go back all the way.The safety belt will move freely again and beready to work for an adult or larger childpassenger.69
