Notice: Ignoring these steps could result incostly damage to your vehicle that wouldnot be covered by your warranty.Trying to start your vehicle by pushing orpulling it will not work, and it could damageyour vehicle.1. Check the other vehicle. It must have a12-volt battery with a negative ground system.Notice: If the other vehicle’s system is not a12-volt system with a negative ground,both vehicles can be damaged. Only usevehicles with 12-volt systems with negativegrounds to jump start your vehicle.2. Get the vehicles close enough so the jumpercables can reach, but be sure the vehicles arenot touching each other. If they are, it couldcause a ground connection you do notwant. You would not be able to start yourvehicle and the bad grounding could damagethe electrical systems.To avoid the possibility of the vehicles rolling,set the parking brake firmly on both vehiclesinvolved in the jump start procedure. Putan automatic transmission in PARK (P) or amanual transmission in NEUTRAL beforesetting the parking brake.Notice: If you leave your radio or otheraccessories on during the jump startingprocedure, they could be damaged. The repairswould not be covered by your warranty.Always turn off your radio and otheraccessories when jump starting your vehicle.3. Turn off the ignition on both vehicles.Unplug unnecessary accessories plugged intothe cigarette lighter or the accessory poweroutlets. Turn off the radio and all lampsthat are not needed. This will avoid sparksand help save both batteries. And it couldsave the radio.387
