477 . . .–––––Section 5If coolant is visible in the surgetank:If coolant is visible in the tank butthe level is not up to the FROID/FULL COLD mark, wait a while forthe engine to cool, then add a50/50 mixture of clean waterand DEX-COOL® coolant at thecoolant surge tank. See "EngineCoolant" in the "Service andMaintenance" section.If no coolant is visible in thesurge tank:Add a 50/50 mixture of cleanwater and DEX-COOL® coolant atthe coolant surge tank. See"Engine Coolant" in the "Serviceand Maintenance" section.NOTICEThis vehicle has a specific cool-ant fill procedure. Failure tofollow this procedure couldcause the engine to overheatand be severely damaged.Here's how to add coolant to thecoolant tank:1. The vehicle should be parkedon a level surface.2. To remove the cap when thecooling system is no longerhot, turn it slowly one quarterturn to the left and then stop.If you hear a "hiss", wait forthat to stop. The "hiss" meansthere is still some pressure left.Then, remove the cap.3. Fill the coolant tank with theright mix up to the FROID/FULL COLD mark.AKENG40_CTS Page 477 Wednesday, July 23, 2008 11:47 AM
