Instrumentation and Controls. . . 62REMOTE DOOR LOCKThis feature allows you to selectthe type of feedback you willreceive when locking the vehicleusing the remote keyless entry orthe keyless access transmitters.You will also receive the selectedfeedback when locking the vehicleusing the passive locking feature.Note:You will only receive feedback ifthe doors are closed.Press the button to enter thesubmenu.While in this submenu, press thebutton repeatedly to scrollthrough the following options:• OFFThere is no horn or lights feed-back when the lock button onthe transmitter is pressed.• LIGHTS ONLYWith this setting activated, theexterior lights will flash whenthe lock button on thetransmitter is pressed.• HORN ONLYWith this setting activated, thehorn will sound when the lockbutton on the transmitter ispressed twice.• HORN & LIGHTSWith this setting activated, theexterior lights will flash whenthe lock button on the trans-mitter is pressed.The horn will sound if you pressthe lock button again withinfive seconds.This is the default setting.• NO CHANGEOnce the desired setting isdisplayed, press the button toselect it.You may now either exit program-ming mode or program the nextavailable feature.To exit programming mode, see"Exiting Programming Mode" laterin this section.See "Keyless Access System" inSection 3 for more information.Also, see "Remote Keyless Entry" inSection 3 for more information onthis light.AKENG40_CTS Page 62 Wednesday, July 23, 2008 11:47 AM
