Problems on the Road. . . 50016. Press O (off) or the on/offbutton to turn the aircompressor off.NOTE:Complete the following stepsquickly.The tire will not be sealedand air may leak from thepuncture until the vehicle isdriven and the sealant hasbeen distributed in the tire.CAUTIONBe careful when disconnectingthe air compressor. Somecomponents can get very hotand could burn you.17. Remove the air compressorplug from the accessorypower outlet.18. Turn the end of thehose counterclockwise todisconnect it from the tirevalve stem.19. Reinstall the cap on the valvestem.20. Store the hose in its originallocation.21. Store the air compressoraccessory plug in its originalposition.22. If you were able to inflate thetire successfully, remove themaximum speed label (ifequipped) from the sealantcanister.The maximum speed labelreminds you to drivecautiously and not to exceed90 km/h (55 mph) until youhave the damaged tire inspect-ed and repaired.AKENG40_CTS Page 500 Wednesday, July 23, 2008 11:47 AM