Canon iR5000 Service Manual
Also see for IR5000 - iR B/W Laser: Driver guideFunction guideQuick guideService manualService manual
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       | |
Contents
|
COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000CHAPTER 4 IMAGE FORMATION SYSTEM4-35 P3.6.3 OthersCOPIER>ADJUST>HV-SP>SP-N1 (Use it to adjust the output for thefirst side of a double-side print or for a single-sided print of plain paper.)COPIER>ADJUST>HV-SP>SP-N2 (Use it to adjust the output of thesecond side of a double-sided print of plain paper.)If the RAM on the DC controller PCB has been cleared, enter the value in-dicated on the service label.COPIER>AJDUST>HV-SP>HVT-SP (Enter the offset value for the sepa-ration high-voltage output of the high-voltage unit.)Enter the value indicated on the label attached to the new high-voltage unitif the RAM on the DC controller PCB has been cleared or the high-voltageunit has been replaced.COPIER>ADJUST>HV-SP>D-HV-SP (Use it to enter the offset for theseparation high-voltage of the DC controller PCB.)Enter the value indicated on the new DC controller PCB if the RAM on theDC controller PCB has been cleared or the DC controller PCB has been re-placed.COPIER>OPTION>BODY>TR-SP-C1 (Use it to switch the transfer/separation output value for pickup from the right deck.)COPIER>OPTION>BODY>TR-SP-C2 (Use it to switch the transfer/separation output value for pickup from the left deck.)COPIER>OPTON>BODY>TR-SP-C3 (Use it to switch the transfer/sepa-ration output value for pickup from the cassette 3.)COPIER>OPTION>BODY>TR-SP-C4 (Use it to switch the transfer/separation output for pickup from the cassette 4.)COPIER>OPTION>BODY>TR-SP-MF (Use it to switch the transfer/separation output for pickup from the manual feed tray.)COPIER>OPTION>BODY>TR-SP-DK (Use it to switch the transfer/separation output for pickup from the side paper deck.)The transfer/separation output value is switched for each source of paper toprevent various problems:0: normal (default)1: prevents double transfer2: prevents separation faults3: prevents transfer faults |
Related manuals for Canon IR5000 - iR B/W Laser
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine