COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000CHAPTER 3 INSTALLATION3-23 SChecks/remarks4. Mounting the Delivery RollThe delivery roller must be equipped with a delivery roll in its middle before mountingthe delivery tray. The following steps, however, must not be performed if installation ofthe shift tray or finisher is planned.Screw Delivery roller guideScrewDeliveryrollershaftDelivery rollE-ringDelivery rollScrewsMagnetcatcherStep12345WorkOpen the front cover, and slide out the fixing/feeding assembly; then remove the two screws,and detach the anti-wrap cover.Mount the delivery roll aligning it against the pinin the middle of the delivery roller; then secure itin place with an E-ring.Mount the anti-wrap cover with two screws, andpush the fixing/feeding assembly into the ma-chine; then close the front cover.Remove the two screws, and detach the readerleft cover; then mount the magnet catcher.Mount the delivery tray.
