COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000CHAPTER 5 PICK UP/FEEDING SYSTEM5-65 P3) Disconnect the connector [3], and re-move the screw [4]; then, detach theguide plate [5].F05-903-044) Remove the E-ring [6] from the front ofthe roller shaft, and move the bearing[7] toward the inside; then, detach thevertical path roller 2 [8].F05-903-059.3.3 Removing the Vertical Path Roller 3/41) Remove the cassette pickup assembly.2) Remove the following from the front:E-ring [1], 1 pc.spacer [2], 1 pc.bearing [3], 1 pc.3) Remove the following from the rear:E-ring [3], 3 pc.bushing [4], 2 pc.roller mount [5]blue gear [6]parallel pin [7]4) Remove the vertical path roller 2/3 [8].F05-903-06[5][3][4][6][7] [8][1][2][3][6] [7][3][4][5][8][4]
