COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000CHAPTER 4 IMAGE FORMATION SYSTEM4-52 P7) Remove the two mounting screws [3],and detach the front side stay [4].F04-702-028) Holding it as indicated, detach the pho-tosensitive drum [5].Take care not to damage thephotosensitive drum when re-moving it. The bearing at therear and the gear at the front ofthe drum need not be removed.F04-702-03If the temperature of the fixingassembly is 150°C or higherwhen replacing the drum unit,be sure to execute the followingin service mode; otherwise, po-tential control will not be ex-ecuted:COPIER>FUNCTION>DPC>DPC.7.2.2 Replacing the Drum Heater1) Remove the photosensitive drum fromthe process unit.2) Remove the two mounting screws [1],and detach the flange [2] from the front.F04-702-04[1][2][3] [3][4][5]
