COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000CHAPTER 3 STANDARDS AND ADJUSTMENTS3-19 T4.14 Adjusting the Position of the Fixing Web Solenoid (SL9)4.14.1 New Fixing WebAdjust the position for the solenoid using the screw [2] so that the distance of travel of thedrive lever [1] is 8.6 mm.F03-414-014.14.2 Existing Fixing WebBefore removing the solenoid, take note of the position [A] of the drive lever when thesolenoid turns on. After replacing the solenoid, adjust its position using the screw [2] so thatthe drive lever [1] will be positioned as it was before replacement when the solenoid turnson.F03-414-028.6mm[1][2]A[1][2]
