COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000CHAPTER 3 STANDARDS AND ADJUSTMENTS3-8 T3. Image Formation System3.1 Routing the Grid Wire of the Primary Charging AssemblySee the Printer Manual: Chap. 4>7.8 “Charging Wire”3.2 Routing the Charging Wire of Charging AssembliesSee the Printer Unit: Chap. 4>7.8 “Charging Wire”3.3 Mounting the Drum Cleaning BladeSee the Printer Manual: Chap. 4>7.11 “Drum Cleaner”3.4 Mounting the Developing BladeSee the Printer Manual: Chap. 4>7.8 “Developing Assembly”3.5 Replacing the Potential Sensor/Potential Control PCBSee the Printer Unit: Chap. 4>7.4 “Potential Sensor Assembly”1. The potential sensor and the potential control PCB are adjusted as asingle unit; be sure to replace both at the same time.2. If you have replaced the sensor and the PCB, be sure to execute offsetadjustment of the sensor.
