Custom Scan Sizes menuUse ToCustom Scan Size [x]Scan Size NameWidthHeightOrientationPortraitLandscape2 scans per sideOffOnSpecify a custom scan size name and page orientation.Notes:• The custom scan size name replaces Custom Scan Size [x] in the printermenus.• ADF Media Type is the factory default setting for custom scan sizes 3, 4,5, and 6.• 8.5 inches is the U.S. factory default setting for Width. 210 millimeters isthe international factory default setting for Width.• 14 inches is the U.S. factory default setting for Height. 297 millimeters isthe international factory default setting for Height.• Portrait is the factory default setting for Orientation.• Off is the factory default setting for “2 scans per side.”Universal Setup menuUse ToUnits of MeasureInchesMillimetersIdentify the units of measure.Notes:• Inches is the U.S. factory default setting.• Millimeters is the international factory default setting.Portrait Width3–14.17 inches76–360 mmSet the portrait width.Notes:• If the width exceeds the maximum, then the printer uses themaximum width allowed.• 8.5 inches is the U.S. factory default setting. You can increase thewidth in 0.01‑inch increments.• 216 mm is the international factory default setting. You can increasethe width in 1‑mm increments.Portrait Height3–14.17 inches76–360 mmSet the portrait height.Notes:• If the height exceeds the maximum, then the printer uses themaximum height allowed.• 14 inches is the U.S. factory default setting. You can increase theheight in 0.01‑inch increments.• 356 mm is the international factory default setting. You can increasethe height in 1‑mm increments.Understanding the printer menus 139
