Change [paper source] to [paper type] [paper size] load [orientation]Try one or more of the following:• Load the correct size and type of paper in the tray or feeder, specify the paper size and type in the Paper menu onthe printer control panel, and then touch Finished changing paper.• Touch Reset active bin to reset the active bin for a linked set of bins.• Cancel the print job.Check tray [x] connectionTry one or more of the following:• Turn off the printer, and then turn it back on.If the error occurs a second time, then:1 Turn off the printer.2 Unplug the power cord from the electrical outlet.3 Remove the indicated tray.4 Reattach the tray.5 Connect the power cord to a properly grounded electrical outlet.6 Turn the printer back on.If the error occurs again, then:1 Turn off the printer.2 Unplug the power cord from the electrical outlet.3 Remove the tray.4 Contact technical support.• From the printer control panel, touch Continue to clear the message and resume the job.Close front doorClose the front door of the printer.Close rear doorClose the rear door of the printer.Close finisher rear doorClose the rear door of the finisher.Troubleshooting 241
