Setting up Multi SendNote: A later version of this User's Guide may contain a direct link to the Administrator’s Guide of this application. Tocheck for updates of this User’s Guide, go to www.dell.com/support/manuals.Use ToScan a document, and then send the scanned document to multiple destinations.Note: Make sure there is enough space in the printer hard disk.1 Open a Web browser, and then type the printer IP address in the address field.Note: View the printer IP address on the printer home screen. The printer IP address appears as four sets ofnumbers separated by periods, such as 123.123.123.123.2 Click Settings > Apps > Apps Management > Multi Send.3 From the Profiles section, click Add, and then customize the settings.Notes:• See the mouse‑over help beside each field for a description of the setting.• If you select FTP or Share Folder as a destination, then make sure the location settings of the destination arecorrect. Type the correct IP address of the host computer where the specified destination is located. Formore information on obtaining the IP address of the host computer, see “Finding the IP address of thecomputer” on page 20.4 Click Apply.To use the application, touch Multi Send on the printer home screen, and then follow the instructions on the printerdisplay.Setting up Scan to NetworkNote: A later version of this User's Guide may contain a direct link to the Administrator’s Guide of this application. Tocheck for updates of this User’s Guide, go to www.dell.com/support/manuals.Use ToScan a document and send it to a shared network folder. You can define up to 30 unique folderdestinations.Notes:• The printer must have permission to write to the destinations. From the computer where thedestination is specified, use sharing, security, and firewall settings to allow the printer at least awrite access. For help, see the documentation that came with your operating system.• The Scan to Network icon appears only when one or more destinations are defined.Setting up and using the home screen applications 24
