Use ToRun Stapler Test Print a report that confirms that the staple finisher is functioning properly.Note: This menu item appears only when a supported staple finisher is installed.Quality menuUse ToPrint Resolution300 dpi600 dpi1200 dpi1200 Image Q2400 Image QSpecify the printed output resolution in dots per inch.Note: 600 dpi is the factory default setting.Pixel BoostOffFontsHorizontallyVerticallyBoth directionsIsolatedEnable more pixels to print in clusters for clarity, in order to enhance images horizontallyor vertically, or to enhance fonts.Note: Off is the factory default setting.Toner Darkness1–10Lighten or darken the printed output.Notes:• 8 is the factory default setting.• Selecting a smaller number can help conserve toner.Enhance Fine LinesOnOffEnable a print mode preferable for files such as architectural drawings, maps, electricalcircuit diagrams, and flow charts.Notes:• Off is the factory default setting.• You can set this option from the printer software. For Windows users, click File >Print, and then click Properties, Preferences, Options, or Setup. For Macintoshusers, choose File > Print, and then adjust the settings from the Print dialog andpop‑up menus.• To set this option using the Embedded Web Server, type the network printer IPaddress in the Web browser address field.Gray CorrectionAutoOffAutomatically adjust the contrast enhancement applied to images.Note: Auto is the factory default setting.Brightness‑6 to 6Adjust the printed output either by lightening or darkening it. You can conserve tonerby lightening the output.Note: 0 is the factory default setting.Contrast0–5Adjust the contrast of printed objects.Note: 0 is the factory default setting.Understanding the printer menus 191
