1216 | E-Series TeraScale Debugging and Diagnosticsw w w . d e l l . c o m | s u p p o r t . d e l l . c o m Figure 61-10. show command-history Command ExampleWrite the contents of the trace bufferThe trace logs are saved to automatically but you can save the contents of a buffer manually via the CLI.To manually write the contents of a trace buffer on CP to a file on the flash:To manually write the contents of a trace buffer on LP to a file on the flash:Clear the trace bufferClear the command history buffer using the command clear command-history from EXEC Privilege mode,as shown in Figure 61-11.Figure 61-11. Clearing the Command HistoryStep Task Command SyntaxCommandMode1 Write the buffered trace log to flash. upload trace-log cp [cmd-history |hw-trace | sw-trace]EXEC PrivilegeStep Task Command SyntaxCommandMode1 Write the buffered trace log to flash. upload trace-log [rp1 | rp2 | linecard] number[hw-trace | sw-trace ]EXEC PrivilegeFTOS#show command-history[12/5 10:57:8]: CMD-(CLI):service password-encryption[12/5 10:57:12]: CMD-(CLI):hostname Force10[12/5 10:57:12]: CMD-(CLI):ip telnet server enable[12/5 10:57:12]: CMD-(CLI):line console 0[12/5 10:57:12]: CMD-(CLI):line vty 0 9[12/5 10:57:13]: CMD-(CLI):boot system rpm0 primary flash://FTOS-CB-1.1.1.2E2.binFTOS#show command-history 10[12/3 15:40:17]: CMD-(CLI):[show config]by default from console[12/3 15:40:22]: CMD-(CLI):[ping 10.11.80.201]by default from console[12/3 15:40:46]: CMD-(CLI):[show interfaces managementethernet 0/0]by default from console[12/3 15:40:49]: CMD-(CLI):[shutdown]by default from console[12/3 15:40:59]: CMD-(CLI):[no shutdown]by default from console[12/3 15:41:1]: CMD-(CLI):[interface managementethernet 0/0]by default from console[12/3 15:41:2]: CMD-(CLI):[shutdown]by default from console[12/3 15:41:7]: CMD-(CLI):[ping 10.11.80.201]by default from console[12/3 21:45:46]: CMD-(CLI):[enable]by default from console[12/3 21:47:18]: CMD-(CLI):[show command-history 10]by default from consoleFTOS#clear command-historyFTOS#show command-history 10[12/3 21:47:43]: CMD-(CLI):[show command-history 10]by default from consoleFTOS#
