Link Layer Discovery Protocol | 595Figure 26-12. Viewing All Information Advertised by Adjacent LLDP AgentConfiguring LLDPDU IntervalsLLDPDUs are transmitted periodically; the default interval is 30 seconds. You can configure a non-defaulttransmit interval—at CONFIGURATION level or INTERFACE level—using the command hello(Figure 26-13).R1#show lldp neighbors detail========================================================================Local Interface Gi 1/21 has 1 neighborTotal Frames Out: 6547Total Frames In: 4136Total Neighbor information Age outs: 0Total Frames Discarded: 0Total In Error Frames: 0Total Unrecognized TLVs: 0Total TLVs Discarded: 0Next packet will be sent after 7 secondsThe neighbors are given below:-----------------------------------------------------------------------Remote Chassis ID Subtype: Mac address (4)Remote Chassis ID: 00:01:e8:06:95:3eRemote Port Subtype: Interface name (5)Remote Port ID: GigabitEthernet 2/11Local Port ID: GigabitEthernet 1/21Locally assigned remote Neighbor Index: 4Remote TTL: 120Information valid for next 120 secondsTime since last information change of this neighbor: 01:50:16Remote MTU: 1554Remote System Desc: Force10 Networks Real Time Operating System Software. Force10 Operating System Version: 1.0. Force10 Application Software Version: 7.5.1.0. Copyright (c) 1999-Build Time: Thu Aug 9 01:05:51 PDT 2007Existing System Capabilities: Repeater Bridge RouterEnabled System Capabilities: Repeater Bridge RouterRemote Port Vlan ID: 1Port and Protocol Vlan ID: 1, Capability: Supported, Status: Enabled---------------------------------------------------------------------------========================================================================
