Simple Network Management Protocol | 987Configure Contact and Location Information using SNMPYou may configure system contact and location information from the Dell Force10 system or from themanagement station using SNMP.To configure system contact and location information from the Dell Force10 system:To configure the system from the manumitting station using SNMP:Task Command Command ModeIdentify the system manager along with this person’s contactinformation (e.g E-mail address or phone number). You may useup to 55 characters.Default: Nonesnmp-server contact text CONFIGURATIONIdentify the physical location of the system. For example, SanJose, 350 Holger Way, 1st floor lab, rack A1-1. You may use upto 55 characters.Default: Nonesnmp-server location text CONFIGURATIONTask Command Command ModeIdentify the system manager along with this person’scontact information (e.g E-mail address or phonenumber). You may use up to 55 characters.Default: Nonesnmpset -v version -c communityagent-ip sysContact.0 s “contact-info”CONFIGURATIONIdentify the physical location of the system. Forexample, San Jose, 350 Holger Way, 1st floor lab,rack A1-1. You may use up to 55 characters.Default: Nonesnmpset -v version -c communityagent-ip sysLocation.0 s “location-info”CONFIGURATION
