688 | Object Trackingw w w . d e l l . c o m | s u p p o r t . d e l l . c o m Displaying Tracked ObjectsYou can display the currently configured objects used to track Layer 2 and Layer 3 interfaces, and IPv4and IPv6 routes, by entering the following show commands:• show track [object-id [brief] | interface [brief] [vrf vrf-name] | ip route [brief] [vrf vrf-name] | resolution |vrf vrf-name [brief] | brief]Use the show track command to display the configuration and status of currently tracked Layer 2 orLayer 3 interfaces, IPv4 or IPv6 routes, or a VRF instance. You can also display the currently config-ured per-protocol resolution values used to scale route metrics when tracking metric thresholds.Figure 31-9. Command Example: show trackFigure 31-10. Command Example: show track briefFTOS#show trackTrack 1IP route 23.0.0.0/8 reachabilityReachability is Down (route not in route table)2 changes, last change 00:16:08Tracked by:Track 2IPv6 route 2040::/64 metric thresholdMetric threshold is Up (STATIC/0/0)5 changes, last change 00:02:16Metric threshold down 255 up 254First-hop interface is GigabitEthernet 13/2Tracked by:VRRP GigabitEthernet 7/30 IPv6 VRID 1Track 3IPv6 route 2050::/64 reachabilityReachability is Up (STATIC)5 changes, last change 00:02:16First-hop interface is GigabitEthernet 13/2Tracked by:VRRP GigabitEthernet 7/30 IPv6 VRID 1Track 4Interface GigabitEthernet 13/4 ip routingIP routing is Up3 changes, last change 00:03:30Tracked by:Track 5IP route 192.168.0.0/24 reachability, Vrf: redReachability is Up (CONNECTED)3 changes, last change 00:02:55First-hop interface is GigabitEthernet 13/4Tracked by:Router# show track briefResId Resource Parameter State LastChange1 IP route reachability 10.16.0.0/16 Up 00:01:082 Interface line-protocol Ethernet0/2 Down 00:05:003 Interface ip routing VLAN100 Up 01:10:05
