46 | Getting Startedw w w . d e l l . c o m | s u p p o r t . d e l l . c o m Figure 3-1. Completed Boot ProcessDefault ConfigurationA version of FTOS is pre-loaded onto the chassis, however the system is not configured when you powerup for the first time (except for the default hostname, which is Force10). You must configure the systemusing the CLI..*************..# #### #######.######## ####### ######### ######## ######## .#. ###### ###########.### ### ## ### ### #### ### .##. ## ### #### ###.### ### ### ### ### ### ### *#. ### ### #*### ### ## ### #### ### ######## *# -## ### #*###### ### ## ######### ### ######## *# ### ## #*### ### ## ### #### ### ### *# #### ### #*### ### ### ### #### #### ### *#. #### ### ###*### ### ### ### ### ##### ## ######## .#.##### #### #### .### ##### ### ### ###### ######## .###### ############ ..# ######### .`************'Copyright 1999-2006 Force10 Networks, Inc.+ Force10 Networks, Inc.+ CPU: DB-MV64460-BP/IBM750Fx (2.3)+ Version: VxWorks5.5.1+ Memory Size: 1038876672 bytes.+ BSP Version: 1.2/1.3.6+ Creation Date : Jan 2 2007nvDrvInit: nvDrvErase passed-> 00:00:10: %RPM0-U:CP %RAM-6-ELECTION_ROLE: RPM0 is transitioning to Primary RPM.00:00:11: %RPM0-P:CP %CHMGR-2-FAN_BAD: Minor alarm: some fans in fan tray 0 are down00:00:11: %RPM0-P:CP %CHMGR-5-CARDDETECTED: Line card 1 presentDSA Card Init00:00:11: %RPM0-P:CP POEMGR-4-POE_POWER_USAGE_ABOVE_THRESHOLD: Inline power used is exceeded 90% oavailable inline power00:00:12: %RPM0-P:CP %CHMGR-5-CARDDETECTED: Line card 2 present00:00:12: %RPM0-P:CP %TSM-6-SFM_SWITCHFAB_STATE: Switch Fabric: UP00:00:12: %RPM0-P:CP %TSM-6-SFM_FULL_PARTIAL_STATE: SW_FAB_UP_1 SFM in the system00:00:13: %RPM0-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Ma 0/000:01:27: %RPM0-P:CP %CHMGR-5-CHECKIN: Checkin from line card 1 (type E48TB, 48 ports)00:01:27: %RPM0-P:CP %CHMGR-5-CHECKIN: Checkin from line card 2 (type E48TB, 48 ports)00:01:28: %RPM0-P:CP %CHMGR-5-LINECARDUP: Line card 1 is up00:01:28: %RPM0-P:CP %CHMGR-5-LINECARDUP: Line card 2 is up00:01:36: %RPM0-P:CP %RAM-5-RPM_STATE: RPM0 is in Active State.00:01:36: %RPM0-P:CP %CHMGR-5-CHAS_READY: Chassis ready00:01:37: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for user on line consoleFTOS>
