976 | sFloww w w . d e l l . c o m | s u p p o r t . d e l l . c o msFlow Show CommandsFTOS includes the following sFlow display commands:• Show sFlow Globally on page 49• Show sFlow on an Interface on page 50• Show sFlow on a Line Card on page 50Show sFlow GloballyUse the following command to view sFlow statistics:Figure 47-2 is a sample output from the show sflow command:Figure 47-2. Command Example: show sflowShow sFlow on an InterfaceUse the following command to view sFlow information on a specific interface:Figure 47-3 is a sample output from the show sflow interface command.Command Syntax Command Mode Purposeshow sflow EXEC Display sFlow configuration information and statistics.Command Syntax Command Mode Purposeshow sflow interfaceinterface-nameEXEC Display sFlow configuration information and statistics on aspecific interface.FTOS#show sflowsFlow services are enabledGlobal default sampling rate: 32768Global default counter polling interval: 201 collectors configuredCollector IP addr: 133.33.33.53, Agent IP addr: 133.33.33.116, UDP port: 634377 UDP packets exported0 UDP packets dropped165 sFlow samples collected69 sFlow samples dropped due to sub-samplingLinecard 1 Port set 0 H/W sampling rate 8192Gi 1/16: configured rate 8192, actual rate 8192, sub-sampling rate 1Gi 1/17: configured rate 16384, actual rate 16384, sub-sampling rate 2Indicates sFlow is globally enabledIndicates sFlow is enabled onlinecards Gi 1/16 and Gi 1/17
