IPv6 Addressing | 497Figure 22-5. Command Example: show cam profile (E-Series )Adjust your CAM-Profile on an C-Series or S-SeriesThe cam-acl command is supported on platforms c sIf you plan to implement IPv6 ACLs, you must adjust your CAM settings.The CAM space is allotted in FP blocks. The total space allocated must equal 13 FP blocks. Note that thereare 16 FP blocks, but the System Flow requires 3 blocks that cannot be reallocated.The ipv6acl allocation must be entered as a factor of 2 (2, 4, 6, 8, 10). All other profile allocations can useeither even or odd numbered ranges.The default option sets the CAM Profile as follows:• L3 ACL (ipv4acl): 6• L2 ACL(l2acl) : 5• IPv6 L3 ACL (ipv6acl): 0• L3 QoS (ipv4qos): 1• L2 QoS (l2qos): 1FTOS#show cam-profile-- Chassis CAM Profile --CamSize : 18-Meg: Current Settings : Next BootProfile Name : IPV6-ExtACL : IPV6-ExtACLL2FIB : 32K entries : 32K entriesL2ACL : 1K entries : 1K entriesIPv4FIB : 192K entries : 192K entriesIPv4ACL : 12K entries : 12K entriesIPv4Flow : 8K entries : 8K entriesEgL2ACL : 1K entries : 1K entriesEgIPv4ACL : 1K entries : 1K entriesReserved : 2K entries : 2K entriesIPv6FIB : 6K entries : 6K entriesIPv6ACL : 3K entries : 3K entriesIPv6Flow : 4K entries : 4K entriesEgIPv6ACL : 1K entries : 1K entriesMicroCode Name : IPv6-ExtACL : IPv6-ExtACL-- Line card 1 --CamSize : 18-Meg: Current Settings : Next Boot--More--
