802.1ag | 91Three values are given within the trap messages: MD Index, MA Index, and MPID. You can referencethese values against the output of show ethernet cfm domain and show ethernet cfm maintenance-pointslocal mep.FTOS#show ethernet cfm maintenance-points local mep-------------------------------------------------------------------------------MPID Domain Name Level Type Port CCM-StatusMA Name VLAN Dir MAC-------------------------------------------------------------------------------100 cfm0 7 MEP Gi 4/10 Enabledtest0 10 DOWN 00:01:e8:59:23:45FTOS(conf-if-gi-0/6)#do show ethernet cfm domainDomain Name: My_NameMD Index: 1Level: 0Total Service: 1ServicesMA-Index MA-Name VLAN CC-Int X-CHK Status1 test 0 1s enabledDomain Name: Your_NameMD Index: 2Level: 2Total Service: 1ServicesMA-Index MA-Name VLAN CC-Int X-CHK Status1 test 100 1s enabledDisplay Ethernet CFM StatisticsTask Command Syntax Command ModeDisplay MEP CCM statistics. show ethernet cfm statistics [domain {name | level}vlan-id vlan-id mpid mpidEXEC PrivilegeFTOS# show ethernet cfm statisticsDomain Name: CustomerDomain Level: 7MA Name: My_MAMPID: 300CCMs:Transmitted: 1503 RcvdSeqErrors: 0LTRs:Unexpected Rcvd: 0LBRs:Received: 0 Rcvd Out Of Order: 0Received Bad MSDU: 0Transmitted: 0
