970 BigIron RX Series Configuration Guide53-1001986-01Displaying 802.1x information33In this example, the 802.1x-enabled port has been moved from VLAN 1 to VLAN 4094. When theclient disconnects, the port will be moved back to VLAN 1.Displaying information on MAC address filters and IP ACLs on aninterfaceYou can display information about the user-defined and dynamically applied MAC address filtersand IP ACLs currently active on an interface.Displaying MAC address filters applied to an 802.1x-enabled portUse the show dot1x mac-address command to display information about MAC filters applied to aninterface. If the MAC address filter is dynamically assigned by 802.1x, the display shows thefollowing.BigIron RX#show dot1x mac-address ethernet 1/1Port 1/1 MAC Address Filter information:802.1x dynamic MAC Filter (user defined) :mac access-list 401 inPort default MAC Filter :mac access-list 400 inThe "Port default MAC Filter" appears if a default MAC filter has been configured on the port. Thisdefault MAC filter is the MAC filter that will be applied to the port once the dynamically assignedMAC filter is removed. If a default MAC filter has not been configured, the message "No Port defaultMAC is displayed.When the dynamically assigned MAC address filter is removed, the display shows the followinginformation.BigIron RX#show dot1x mac-address ethernet 1/1BigIron RX# show interface e 12/2GigabitEthernet1/3 is up, line protocol is upHardware is GigabitEthernet, address is 000c.dbe2.5800 (bia 000c.dbe2.5800)Configured speed auto, actual 100Mbit, configured duplex fdx, actual fdxConfigured mdi mode AUTO, actual MDIXMember of L2 VLAN ID 4094 (dot1x-RADIUS assigned), original L2 VLAN ID is 1,port is untagged, port state is ForwardingSTP configured to ON, Priority is level0, flow control enabledForce-DSCP disabledmirror disabled, monitor disabledNot member of any active trunksNot member of any configured trunksNo port nameInternet address is 12.12.12.250/24, MTU 1522 bytes, encapsulation ethernet300 second input rate: 810 bits/sec, 0 packets/sec, 0.00% utilization300 second output rate: 1253 bits/sec, 1 packets/sec, 0.00% utilization70178 packets input, 7148796 bytes, 0 no bufferReceived 0 broadcasts, 0 multicasts, 70178 unicasts0 input errors, 0 CRC, 0 frame, 0 ignored0 runts, 0 giants, DMA received 70178 packets91892 packets output, 10081165 bytes, 0 underrunsTransmitted 9853 broadcasts, 13330 multicasts, 68709 unicasts0 output errors, 0 collisions, DMA transmitted 91892 packets
