BigIron RX Series Configuration Guide 110753-1001986-01Displaying RIPng information 44• RIPng routing tableDisplaying RIPng configurationTo display RIPng configuration information, enter the following command at any CLI level.Syntax: show ipv6 ripThis display shows the following information:Displaying RIPng routing tableTo display the RIPng routing table, enter the following command at any CLI level.TABLE 181 RIPng configuration fieldsThis field... Displays...IPv6 RIP status/port The status of RIPng on the Brocade device. Possible status is “enabled” or“disabled.”The UDP port number over which RIPng is enabled.Administrative distance The setting of the administrative distance for RIPng.Updates/expiration The settings of the RIPng update and timeout timers.Holddown/garbage collection The settings of the RIPng hold-down and garbage-collection timers.Split horizon/poison reverse The status of the RIPng split horizon and poison reverse features. Possiblestatus is “on” or “off.”Default routes The status of RIPng default routes.Periodic updates/trigger updates The number of periodic updates and triggered updates sent by the RIPngrouter.Distribution lists The inbound and outbound distribution lists applied to RIPng.Redistribution The types of IPv6 routes redistributed into RIPng. The types can include thefollowing:• STATIC – IPv6 static routes are redistributed into RIPng.• CONNECTED – Directly connected IPv6 networks are redistributed intoRIPng.• BGP – BGP4+ routes are redistributed into RIPng.• ISIS – IPv6 IS-IS routes are redistributed into RIPng.• OSPF – OSPFv3 routes are redistributed into RIPng.BigIron RX# show ipv6 ripIPv6 rip enabled, port 521Administrative distance is 120Updates every 30 seconds, expire after 180Holddown lasts 180 seconds, garbage collect after 120Split horizon is on; poison reverse is offDefault routes are not generatedPeriodic updates 0, trigger updates 0Distribute List, Inbound : Not setDistribute List, Outbound : Not setRedistribute: CONNECTED
